One sheet of electrically conductive film of ITO on PET.

Size 300mm X 300mm.

ITO coated PET film is a vacuum-deposited Indium Tin Oxide (ITO)on optical grade polyethylene terephthalate film (PET). The conductive ITO layer is strongly adhered to the PET substrate and is thin enough to maintain high visible light transmission >80% for sheet resistance of 30 ohm/sq.

Product

ITPC30

PET film thickness

175um (7 mil.)

Transmittance

80%

Sheet Resistance

30 ohm / square

Protective masks on both sides

Yes

Potential applications
  • OLEDs
  • Flex. Solar cells
  • Sensors
  • Touch screen
  • EL devices
  • Smart windows
  • EMI shielding
  • Transparent heaters

 

ITO on PET conductive film is both flexible and transparent.

Sheet resistance of 30 ohm/square is good balance between conductivity and transparency.

  • Lower sheet resistance = higher conductivity

  • Please note: higher conductivity = thicker ITO layer = limited ability to bend without cracking the ITO layer and damage conductivity.


The film is protected on both sides with protective film that can be easily peeled off before use.

A multimeter may be used to confirm which is the conductive side.

 

 SILVER NANOFILM ON PET -  9 ohm/square    ***     PEDOT:PSS Conductive polymer    

                        


 
     PEDOT:PSS ink -Fully formulated          ***            Polyimide Kapton Film 5mil. Thick

               


         Colorless Polyimide Film