Descriptions:

1. Quality materials: PA high-quality raw materials are adopted for safe insulation. The joint is transparent and smooth as a whole, has high toughness, strong compression resistance and aging resistance, is firmer and more reliable to use, and has long service life.

2. Sealing ring: High elastic sealing ring, strong fixing tension. Thick materials ensure safe and waterproof cable usage.

3. Clamping jaw: Clamping cable is wide in scope, resistant to tensile force, strong waterproof, dustproof, salt and acid and alkali, matched with sealing nut, time-saving and convenient for transfer. High toughness tightens and strengthens waterproof performance.

4. Lock Nut: The fastening of the card is waterproof, and the sealing ring is not easy to shift and deflect. Strong fixability, ensuring waterproof and fixing effect.

5. Working temperature: -40℃ to 100℃ in static state,instantaneous heat resistance up to 120℃；-20℃ to 80℃ in dynamic state,instantaneous heat resistance up to 100℃

6. Special design of clamping die,sealing nut and rubber part,applicable for vibrating machine,large range in clamping the cable,ultra-strong stretching resistance,waterproof,dustproof,and high ability to resist salt,acid,alkali,alcohol,grease and general solvent.

Feature:

1. Design of the clamping die and rubber part. No damage to cables and devices.

2. Without disassembly, cable can be inserted through directly then tighten easily and save time.

3. Easy to use. Long service life.

4. Used for fixing cables. Large range of cords will be accommodated

5. Applicable to machinery control boxes, distribution panels, electrical appliances, machines etc.

6. Vital relief against tension on cable

7. Fully sealing and moisture resistant PG Cable Glands

Specification:

• Model: PG7 cable glands

• Material: PP/Pa

• Color: Black / White

• Cable glands adjustable 3 - 6.5mm.

• Cable range: 3 - 6.5mm/0.12 - 0.26 inches.

• Thread O.D.: 12.5mm/0.49 inches.

• Thread length: 8mm/ 0.32 inches.

• IP rating:IP68

Package Included:

• 10pcs Waterproof PG7 Cable Gland Connector

Installation instruction:

1. Measure install position hole diameter

2. Measure cable diameter to choose matched cable gland

3. Check the right position

4. Cable go through sealing Nut-Seal-Claw-Body- Gasket-Lock Nut

5. Tighten up the lock nut and the sealing nut by a spanner or hands

Note:

1. Sealing nut and lock nut should be tightly locked or may cause leakage

2. To use gasket is a prerequisite to reach IP68 protection standard