Introduction:
One yellow OBD cable adapter plus an ELM OBD2 USB Diagnostic Lead plus a Security Gateway Module Bypass Direct to allow additional diagnostic options for Italian cars. These can include ENGINE, ABS, POWER STEERING and CAN ECU's (an additional KKL VAG COM may be required to connect to specific ECUs, [depending on car model]).
Specification:
Yellow Adapter Lead (Adapter 3)
Security Gateway Module Bypass Direct (to bypass security module on Alfa Fiat Chrysler Jeep Automobiles post 2018 models)
Pin Configurations:
Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12.
Security Gateway Module Bypass Direct = 12+8.
Modified ELM:
* Please note that this ELM 327 HAS been modified to resolve the connection problems reported
"Please note that almost all ELM 327 interfaces produced in the last few months have problems accesing the CAN network.The problem can be easily fixed by simply removing one resistor from the interface. The procedure is covered in the following topic on the forum: FAULTY ELM 327 INTERFACES DE-MYSTIFIED.
It was also reported that the new OBDLink interfaces have the same problem."
Additional Items Required:
Software (full version)
Other Details:
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.
Some models may require the full version of the software to communicate with some ECUs.