eBay

Condition: 100% new
Color:Silver
Material: Stainless Steel
Size: approx.7.8x1x1.8cm(3.07x0.39x0.71inch)(L x Top Diameter x Bottom Diameter)
Bore Diameter: approx.0.1cm(0.04inch)
Oil Inlet Thread Diameter: approx.0.9cm(0.35inch)
Air Inlet Thread Diameter: approx.1.2cm(0.47inch)
Siphon Height: 30cm
Working Pressure: 0.2~0.8Mpa
Flow Rate: 10 L/H
Flow Tolerance: +/-10%
Fuel Injection Angle: 45 degrees
Suitable for: be used in diesel, heavy oil, waste oil, waste oil, animal and vegetable oils, and other alcohol-based fuel oil, gas, combustion spray systems, spray workshop humidification cooling system, mechanical cleaning dust, various types of industrial spray aerosol products
Item included: 1 x Fuel Burner Nozzle
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.

2) The above parameters are tested with clear water, other liquids are added or subtracted according to the density proportion.

3) Stable combustion, no obvious flickering of the flame, no sticking out of the burner, efficient atomization.

Product Dimension:

Feature:

1) Since the fluid passage has a large, and therefore have a good anti-clogging effect.

2) The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.

3) Can control the air flow and pressure to adjust the spray flow, angle and size granularity.

4) Can produce tiny micro particle size mist particles at low pressure and low volume conditions.

5) In the heavy oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good.

6) Siphon air atomizing nozzle is a low pressure can spray atomization of the best at low pressure air atomizing nozzle.