Tiger Cavity Wall Ties - 100 mm
Really simple and quick to install
  1. Drill 8 mm hole in to existing wall at least 40 mm deep
  2. Insert the rubber sleeved end of the wall tie
  3. Twist the tie until 'finger tight' so the rubber sleeve expands in the hole, creating 360° grip
  4. Bend the triangle end so it is flat to the new wall course and mortar the next layer of wall in place
  5. Move the drip ring to the appropriate position
No wall plug needed
  • Capillary drip feature to prevent moisture creep within wall cavities
  • Build up to 3 storeys or 10 metres
  • For domestic & light commercial building work
  • The ties are made from A2 stainless steel with an EPDM rubber sleeve
  • The rubber sleeve creates a 360° waterproof seal
  • Only tool required is a suitable 8 mm diameter drill
  • Minimum drilling depth 40 mm (30 mm embedment)
  • Suitable for use with a wide variety of base materials including perforated brick or where fire resistance of greater than half-an-hour is required
  • Space the ties a minimum of 1 tie every meter in all directions
  • Manufactured in the UK to British Standards
PACK OF 10
YouTube installation video at https://youtu.be/5YilX898x-Q
Tiger cavity wall ties: 50 mm 100 mm 150 mm
Tiger starter wall ties: 25 mm 50 mm 100 mm 150 mm
For more information visit https://fastenerfix.co.uk