Works on Ecotec/2010 Buick LaCrosse, 2010 Chevrolet Equinox, 2010 GMC Terrain, fit with 2.0L, 2.4L ECOTEC engines
Features:
(1) The AM-EN-48953 remove timing chain guide bolt
plate tensioner/ Rotary intake camshaft actuator to install FTST-0004
locking tool. (2)Remove timing chain guide bolt plate tensioner/ Rotary intake camshaft actuator to install FTST-0004 locking tool. (3)Similar to EN48953. The camshafts on the
ECOTEC engines must be held when removing or installing the cam phaser
bolts, or the timing chain may slip and not keep its relationship to the
phasers. EN-48953 mounts to the front of the block and its tabs engage
both cam phasers to hold them so the phaser bolts may be serviced.
Tool Use Method: 1.Remove timing chain guide bolt 2.Remove timing chain guide plate 3.Remove timing chain tensioner 4.Rotary intake camshaft actuator to install FTST-0004 locking tool
5.FTST-0004 lock tool mounted to the cylinder cover and tighten to 10
N-m. If the intake camshaft actuator independently of the camshaft and
did not move the lock, the counterclockwise rotation of the intake camshaft, the locking tool fixing actuator, the actuator locking on the cam 6.Loosen intake camshaft actuator bolt 6.Loosen exhaust camshaft actuator bolt 7.Remove FTST-0004 (Please Note: Marking chain and actuator is very important in operating procedures. Before marking the actuator and chain, the oil must be removed from the camshaft actuator and timing chain)
