Please note this is an aftermarket part designed to fit Mercedes Sprinter which is not supplied by Mercedes
This camera is designed to replace the 3rd brake light situated on the rear of the vehicle.
Please note this listing comes with everything required to install this system
The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle.
Please see the instructions below to see installations instructions.
Camera specifications:
Cable Length - 10 Meters
System - NTSC
Lend:1.9
Min illumination:0Lux (LED ON)
Image sensors: 1/3″ color HD CMOS/CCD
Perfect IR night vision, 8 pcs IR LED
Night Vision distance:30ft
Minimum illumination. <0.5 BLC: Auto
White Balance: Auto,Video Colour: Colourful
Waterproof Class: ip68
Effective Pixels : 756(H)*504(V)
Pixel Resolution : 600TV lines
Video Output: 1.0Vp-p,75
Electronic Shutter: 1/60
S/N ratio: Better Than 48db
Lens Angle: 170°
Operation Temperature: -20°C+70°C RH95%
Storage Temperature: -40°C+100°C RH95%
Working Power (DC): 12V/1,5
Watt Current consumption: 90mA Max
Video cable is RCA connector
Screen Size: 4.3"(16:9)
Resolution: 482*272
Model: PAL/NTSC (Automatic throw-over)
Power Supply: DC 9-35V
Visible Area: 96mm x 54mm
Power: 2W
2-channel video input:V1/ V2 auto switching(V1 display first )
Note: Please Connect the Rearview camera's video cable with LCD's yellow cable (Video V1)
Then the LCD will show Camera's video when you are Reversing, and stop playing movie (auto switching)
Features:
Simple to install
Swivel function
Full colour display
Installation tips:Two-way video inputs will display a black screen when no there is no signal
Adjustments within the menu: Contrast, Brightness, Chroma, Mode (16:9/4:3), etc.
Monitor can spin 180 degrees and be mounted upside down if necessary
Wireless 2.4GHz transmitter /receiver set (12Volt for vehicle installation)
Work Range:Up to about 80m(Hollowness)
Connects to rear-view camera and front video screen
Power: DC 12V
Transmitter/Receiver Cable Length:1.5m
Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit.
Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end.
The transmitter also includes a handy pass through for the power so you can connect it inline with your camera.
Wireless transmitter with male phono plug and male 2.5mm power plug for supplying power to the camera.
Wireless receiver with male phono plug for connection to monitor.
Brake light reversing camera
4.3" Monitor
10 meter 4 pin extension cable
Male to Male connection
4 Pin accessory Cable
12v Power adaptor for camera
12v Power adapter for Monitor
1 x 2.4Ghz Transmitter
1 x 2.4Ghz Receiver
Please refer to the diagram for reference which can be found in the in images for this listing
We recommend before installing the product in place test everything to check that it works.
First thing to consider is which power source you are going to use for the Monitor and Reciever. This should be fused.
Start by connecting the Cables together like shown in photo on the eBay listing.
Below is a description of each wire
(1) Red - 12v Power supply
(2) Black - Ground
(3) White - Monitor AV source 2 (DVD or Dash cam)
(4) Yellow - Monitor AV source 1 (Camera)
(5) Yellow- Reciever AV out
(6) Red - 12v Power supply
(7) Black - Ground
(8) To connect to Reverse light (+)
(9) To Connect to Reverse light (-)
(10) Transimitter Av in
(11) 12V Power Supply
(12) Yellow Camera AV
(13) Power for Camera
(14) Existing Brake light (+)
(15) Existing Brake light (-)
For the Power of the transmitter use the positive and negative from the reverse light. This ensures the camera is only turned on when the van is reversing
If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom
We also supply the 10m extension cable which is supplied with the camera. This can be used to wire the camera with the Wifi Transmitter.
Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched