2 KG Sweatband On Roll from Copper/Solder Bridges/Solder Tags 0,18 x 11mm

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


We are a company that specializes in the sale and cell exchange of batteries. With a good price/performance ratio and optimal customer satisfaction, we want to further establish ourselves on the market. Visit our website or come by in person. We look forward to you. Your battery treatment team

Illustration may deviate (colour/imprint)

 item description

Illustration may deviate (colour/imprint)

Item description: 

Attention you model builders, hobbyists and competitors:


Ideal for welding and soldering of accumulators and batteries. Best quality and conductivity, as well Optimum soldering behavior due to copper material. The data sheet can be requested. 
We've been using this tape for years and love it. These dimensions can be used very flexibly. Due to the optimum thickness of 18mm, it can be welded effortlessly by any "normal" welding system, even with short welding times of just 30-40ms. If thinner is used, the current flow (or resistance) may be too high... if thicker one is used, the welding current and welding time must be increased significantly, which entails the risk of welding the cells.

Can be cut to desired size with household scissors. 
Other quantities, sizes and thicknesses also available...please inquire.  
Technical specifications:

Material:

copper tape
Composition:

Dimensions (L/W/H):

61% copper / 18% nickel / 20% zinc / 1% other

33mm x 0.18mm
Weight:

0.5KG
Unit:STK 


Temp condition

R580 / H180

Tensile strength in N/mm² min.

580

0.2% yield strength in N/mm² approx.

510

Elongation | AL50% at least

2

Vickers hardness HV min.

180

electr. Conductivity in % IACS

4

Shipment 

We offer the following shipping service providers:



Payment Methods

We offer the following payment methods:



 

 




- When paying by bank transfer, please enter your eBay name in the reference, otherwise there may be delays in the assignment and shipping.


- If you wish, we can also deliver cash on delivery to you, but please note that additional fees apply for the otherwise conditionally free shipping (see shipping and payment methods).

 


- You are also welcome to pick up the auctioned item in our shop immediately after the end of the auction. Visit us in person, we look forward to your visit!

 

Battery Disposal Instructions

You can return old batteries that we have or have had in our range as new batteries to our shipping warehouse (shipping address) free of charge. The symbols shown on the batteries have the following meaning: The symbol of the crossed-out wheeled bin means that the battery must not be disposed of with household waste.



Pb = battery contains more than 0.004% lead by mass
Cd = battery contains more than 0.002 percent by mass of cadmium
Hg = battery contains more than 0.0005 percent by mass of mercury.

Please note the above instructions.

safety notice

All lithium-ion cells may only be operated with protective electronics (deep discharge, short circuit and overcharge protection)! Please note that lithium-ion cells may only be used by authorized specialist personnel. In the event of incorrect handling or Short circuit, this can lead to fire or explosion. With the purchase of our lithium-ion batteries, you automatically confirm that you have read and understood this safety information and only use our cells properly. This includes professional processing and processing of the cells, as well as proper storage.

The company assumes no liability for damage to persons or property or the cells themselves (if they have already been installed) caused by improper use, the wrong area of ​​application of the cells and defects in the cells due to defective existing electronics or unauthorized use of the articles arise.

Note on packaging

According to the provisions of the Packaging Ordinance, we are obliged to take back packaging for our products that does not bear the mark of a system of comprehensive disposal (such as the "Green Dot" of Duales System Deutschland AG) and to ensure that it is reused or disposed of. For further clarification of the return of such products, please contact us.

see legal information of the seller

We will then name a municipal collection point or a disposal company in your area that will accept the packaging free of charge (see shipping and payment methods). If this is not possible, you have the option of sending the packaging to us free of charge. We reuse the packaging or dispose of it in accordance with the provisions of the Packaging Ordinance.

All brand names are the property of their respective owners. The naming of brand names and protected trademarks is only of a descriptive nature.  
We've been using this tape for years and love it. These dimensions can be used very flexibly. Due to the optimum thickness of 18mm, it can be welded effortlessly by any "normal" welding system, even with short welding times of just 30-40ms. If thinner is used, the current flow (or resistance) may be too high... if thicker one is used, the welding current and welding time must be increased significantly, which entails the risk of welding the cells. All lithium-ion cells may only be operated with protective electronics (deep discharge, short circuit and overcharge protection)! Please note that lithium-ion cells may only be used by authorized specialist personnel. In the event of incorrect handling or Short circuit, this can lead to fire or explosion. With the purchase of our lithium-ion batt
Herstellernummer nicht zutreffend
Marke Markenlos
EAN Nicht zutreffend