Package include:
1 x 3018 Pro GRBL Control CNC Laser machine kit (without laser)
1 x ER11 Collet
1 x offline hand controller
10 x 20°0.1mm drill bits
1 x Set of allen wrench
1 x Power Supply
1 x U disk include user manual & GRBL Software
product parameters
working area
30x18x4.5cm
Frame size
33x40x24cm
Mesa
30x18cm
Spindle
775 spindle motor (12-36V) 24V: 10000r/min
Spindle Chuck
ER11
Step motor
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Power supply
24V 5.6A
Software
GRBL controller
supported system
windows XP SP3, win7, win8, win10(32/64 can be)(Do not support Mac)
Drill bits
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc
Laser
Support laser
clamps
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
CNC Mini 3018 PRO Engraving Laser Machine DIY GRBL Control
Introduction:
Body
used profiles and plastic, small size, light weight, USB interface,
GRBL control system, learning, entry preferred. Can use carving knife,
but also can use laser engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 40x33x24CM
Spindle : 775 spindle motor (12-36V) 24V: 10000r/min
Spindle Collet :ER11-3.175mm, Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.3N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 / Win 10
Drill bits: tip 0.1mm ,20 degree , diameter3.175mm.
Support Laser: 500mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Offline Controller: 1 Inch LCD, gcode, txt, faucet, nc, ncc, cnc and other processing file formats, with instructions in English and 1GB micro SD card (with TF card)
Using with 775 spindle motor (cutters):
Design software: CAM
Control software: GRBL (GRBLcontrol / Candela)
File format: G code (gcode / txt / nc / ncc / tap / ...)
Spindle power: 120W (24V)
Spindle speed: 10000rpm
Processing method: relief / drilling / cutting
Workable material: wood / plastic / PCB / acrylic / plywood / ...
product parameters
working area
30x18x4.5cm
Frame size
33x40x24cm
Mesa
30x18cm
Spindle
775 spindle motor (12-36V) 24V: 10000r/min
Spindle Chuck
ER11
Step motor
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Power supply
24V 5.6A
Software
GRBL controller
supported system
windows XP SP3, win7, win8, win10(32/64 can be)(Do not support Mac)
Drill bits
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc
Laser
Support laser
clamps
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
CNC Mini 3018 PRO Engraving Laser Machine DIY GRBL Control
Introduction:
Body
used profiles and plastic, small size, light weight, USB interface,
GRBL control system, learning, entry preferred. Can use carving knife,
but also can use laser engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 40x33x24CM
Spindle : 775 spindle motor (12-36V) 24V: 10000r/min
Spindle Collet :ER11-3.175mm, Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.3N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 / Win 10
Drill bits: tip 0.1mm ,20 degree , diameter3.175mm.
Support Laser: 500mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Offline Controller: 1 Inch LCD, gcode, txt, faucet, nc, ncc, cnc and other processing file formats, with instructions in English and 1GB micro SD card (with TF card)
Using with 775 spindle motor (cutters):
Design software: CAM
Control software: GRBL (GRBLcontrol / Candela)
File format: G code (gcode / txt / nc / ncc / tap / ...)
Spindle power: 120W (24V)
Spindle speed: 10000rpm
Processing method: relief / drilling / cutting
Workable material: wood / plastic / PCB / acrylic / plywood / ...
product parameters
|
working area |
30x18x4.5cm |
|
Frame size |
33x40x24cm |
|
Mesa |
30x18cm |
|
Spindle |
775 spindle motor (12-36V) 24V: 10000r/min
|
|
Spindle Chuck |
ER11 |
|
Step motor |
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M |
|
Power supply |
24V 5.6A |
|
Software |
GRBL controller |
|
supported system |
windows XP SP3, win7, win8, win10(32/64 can be)(Do not support Mac)
|
|
Drill bits |
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc |
|
Laser |
Support laser |
|
clamps |
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm |
CNC Mini 3018 PRO Engraving Laser Machine DIY GRBL Control
Introduction:
Body
used profiles and plastic, small size, light weight, USB interface,
GRBL control system, learning, entry preferred. Can use carving knife,
but also can use laser engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 40x33x24CM
Spindle : 775 spindle motor (12-36V) 24V: 10000r/min
Spindle Collet :ER11-3.175mm, Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.3N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 / Win 10
Drill bits: tip 0.1mm ,20 degree , diameter3.175mm.
Support Laser: 500mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Introduction:
Body used profiles and plastic, small size, light weight, USB interface, GRBL control system, learning, entry preferred. Can use carving knife, but also can use laser engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 40x33x24CM
Spindle : 775 spindle motor (12-36V) 24V: 10000r/min
Spindle Collet :ER11-3.175mm, Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.3N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 / Win 10
Drill bits: tip 0.1mm ,20 degree , diameter3.175mm.
Support Laser: 500mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Offline Controller: 1 Inch LCD, gcode, txt, faucet, nc, ncc, cnc and other processing file formats, with instructions in English and 1GB micro SD card (with TF card)
Using with 775 spindle motor (cutters):
Design software: CAM
Control software: GRBL (GRBLcontrol / Candela)
File format: G code (gcode / txt / nc / ncc / tap / ...)
Spindle power: 120W (24V)
Spindle speed: 10000rpm
Processing method: relief / drilling / cutting
Workable material: wood / plastic / PCB / acrylic / plywood / ...
Payment:
> 1. Payment is needed to receive within 5 days after deal.
> 2. We only accept PayPal.
> 3. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding. And please make sure that your PayPal registed address is the same with your eBay registed address.
Feedback:
We maintain hightest buyer ratings
> Positive Feedback will be much appreciated from you.
> Any dissatisfaction,please contact us immediately!
> Please do not leave neutral or negative feedback before we help you out.
Returns:
> Defect: We will fully refund or send you a new replacement,please contact and return within 30 days.
> Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods.
> Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued.
Contact us:
> If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.
