We use the latest in technological advancements to provide you with an easy to use, heavy metals water testing kit that provides results within 60 seconds.

WHAT WILL I GET WITH MY ORDER
  1. 10 Heavy Metals Test Kit Strips
  2. Free Delivery Australia Wide
  3. Test Kit Instruction Sheet
  4. Test Kit Chart
Drinking high levels of heavy metals can can cause long-term health and behavioral problems. Drinking water contaminated with high doses of heavy metals can cause serious health problems. There is no safe level of heavy metals in drinking water. Children under six years of age and pregnant women are at the highest risk.

The Heavy Metals Test Kit has been specifically designed to test the to 11 parameters as per the Australian Drinking Water Guidelines. The kit includes 10 easy to use, single dip test strips with the following 11 parameters:

HEAVY METALS WATER TEST KIT INSTRUCTIONS
  1. Remove one strip from the bottle and replace the cap immediately.(strips must be sealed to protect humidity)
  2. While holding the strip from the opposite end of the test pad,immerse the reagent area (the test pad) of the strip in the water specimen or water stream and wait for 1-2 seconds.
  3. Tap off excess water and wait 60 seconds
  4. Hold the test strips vertically and raise the color chart
  5. Compare your results to the chart. Read the test results carefully in a well-lit area with the test pad held near the color chart
  6. Match the test strip colors with the corresponding colors on the chart and record your results.
  7. Changes in color that appear after 60 seconds are of no diagnostic significance.
  8. Discard used test strip as results are most accurate between 60 and 90 seconds.