When ordering from the US, parcels may be subject to import tax and duty charges, which the buyer is responsible to pay.

SCREAMIN DEMON SDA-850-AN BT 850 CFM ANNULAR BLOW THRU CARB #6 LINE KIT W BONNET

This product data sheet is originally written in English.









Buy by 3:00 pm cst & item will ship same day M-F thanks 


 thanks from RDRACINGINC.


NEW SCREAMIN DEMON GAS CUSTOM DEMON SDA-850-AN BLOW THRU MECHANICAL 850 ANNULAR BLOW THRU TURBO 4150 FLANGE WITH BLACK LINE KIT

 

ALL NEW ALUMINUM 5 POUNDS LIGHTER THEN THE ZINC DEMON,  & NOW COME WITH DUEL FUEL BOWL SIGHT GLASS Windows.

 YOU GET A DEMON STICKER, BASE GASKET & AIR HORN GASKET TO.

 

   THESE CUSTOM CARBS ARE SPECIFICALLY CALIBRATED TO WORK ON APPLICATIONS USING A CENTRIFUGAL BLOWER AND A BONNET. THE FUEL CURVE IS DESIGNED TO DISTRIBUTE MORE FUEL AS BOOST IS INCREASED.

 

YOU GET THE CARB & #6 BLACK LINE KIT

 

 

  • Features and Benefits: 
  • Pressure-sealed throttle shafts with fuel curve and metering circuits calibrated specifically for turbo and supercharged applications 
  • Mechanically operated secondary throttle plates provide instant response 
  • Solid fuel floats permit the use of all racing and street gasoline without risk of deterioration or distortion under boost. 

  • Absence of choke tower reduces turbulence between bonnet and carburetor 
  • Cast aluminum baseplate all ports plugged, billet metering blocks ensure strong, reliable, non-porous components 
  • Patented streamlined air entries and concentric venturii provide excellent fuel distribution and consistent air-fuel ratios to each cylinder 
  • Four-corner idle, large float-bowl Windows, replaceable air bleeds and idle-feed restrictors make tuning quick and easy 
  • Large-diameter needle-and-seat valves (.130") and dual inlets are provided for consistent fuel flow 
  • Common interchangeable tuning parts include Jets, Power Valve, accelerator pump discharge nozzles (Squirters), bowl and metering block gaskets, etc. 
  • Throttle linkage included 

PRIMARY MAIN JET 80 
SECONDARY JET 90
IDLE AIR BLEED 70
HI SPEED BLEED 31
PRI NOZZLE 35
SEC NOZZLE 35
NEEDLE & SEAT 130
PRIMARY POWER VALVE 4.5


THIS CARB COMES WITH THE NEW HOLLEY 4150 BONNET # 120-232

These new carb hats are the perfect solution for any blow through installation. The Holley EFI carb Bonnet contoured designed promotes optimal airflow, while providing excellent hood clearance for most applications with a 5-1/8" air cleaner flange. These hats feature a 1/8th NPT reference port that can be used as a convenient hookup for boost gauges or carbureted fuel pressure regulators . The inlet is designed for a 3.5" silicone coupler, with a sealing lip to ensure a leak free installation.

Features:

Hi-Flow Contour design for optimal air distribution

3.97” Tall for excellent hood clearance, 3.5" INLET

1/8 NPT Reference port for boost gauges or carbureted fuel pressure regulators

Fits all applications with a 5-1/8th” air cleaner flange, 4150 Flange Carburetors.

The air cleaner stud entry can be drilled to 5/16 for installations with larger air cleaner studs

Black Powder Coat finishes

Air cleaner gasket, stud, washer, nut and 1/8NPT plug – included















   THESE CUSTOM CARBS ARE SPECIFICALLY CALIBRATED TO WORK ON APPLICATIONS USING A CENTRIFUGAL BLOWER AND A BONNET. THE FUEL CURVE IS DESIGNED TO DISTRIBUTE MORE FUEL AS BOOST IS INCREASED. Common interchangeable tuning parts include Jets, Power Valve, accelerator pump discharge nozzles (Squirters), bowl and metering block gaskets, etc.  These new carb hats are the perfect solution for any blow through installation. The Holley EFI carb Bonnet contoured designed promotes optimal airflow, while providing excellent hood clearance for most applications with a 5-1/8" air cleaner flange. These hats feature a 1/8th NPT reference port that can be used as a convenient hookup for boost gauges or carbureted fuel pressure regulators . The inlet is designed for a 3.5" silicone coupler, with a sealing li
THESE CUSTOM CARBS ARE SPECIFICALLY CALIBRATED TO WORK ON APPLICATIONS USING A CENTRIFUGAL BLOWER AND A BONNET. THE FUEL CURVE IS DESIGNED TO DISTRIBUTE MORE FUEL AS BOOST IS INCREASED. Common interchangeable tuning parts include Jets, Power Valve, accelerator pump discharge nozzles (Squirters), bowl and metering block gaskets, etc.  These new carb hats are the perfect solution for any blow through installation. The Holley EFI carb Bonnet contoured designed promotes optimal airflow, while providing excellent hood clearance for most applications with a 5-1/8" air cleaner flange. These hats feature a 1/8th NPT reference port that can be used as a convenient hookup for boost gauges or carbureted fuel pressure regulators . The inlet is designed for a 3.5" silicone coupler, with a sealing li
Placement on Vehicle Front
OE Spec or Performance/Custom Performance/Custom
Country of Manufacture United States
OE/OEM Part Number none
Brand Demon
Barrel Count 4
Country/Region of Manufacture United States
Manufacturer Part Number Does Not Apply
Part Brand DEMON
Manufacturer Warranty 90 Day
Mounting Flange Type Square Bore
Type Carburetor
Choke Type none
Features blow thru