BRIXIAMOTO presents the new range of X3 LED lamps for motorcycles and scooters,
designed to meet the needs of the most demanding motorcyclist,
who wants to invest in the safety of driving at night to see and be seen,
equipping the vehicle with a technology that raises its value and technological content.

Our LED lamp kits can be mounted on mopeds, scooters and motorcycles: just take these parameters into account:
1) Make sure the motorcycle is powered at a voltage of 12V
2) Please make sure what type of bulb is fitted to your vehicle before buying online

WHY INSTALL A LED LAMP?

INCREASE IN ACTIVE SAFETY
The kit allows a faster detection of obstacles on the road surface:
thanks to the deeper and wider beam, which projects triple the light onto the road,
these lamps allow the driver a clear and early detection of any objects, cyclists, pedestrians
possibly present on the roadway, or in the close vicinity.

INCREASE IN PASSIVE SAFETY
near junctions and level crossings the vehicles that are about to cross your trajectory will have a large amount of notice.
This element involves a reduction in the number of situations in which an emergency maneuver is necessary
and has a positive effect on driving safety.

GREATER BRIGHTNESS
The luminous power is about 3 times greater than that of the original headlights (4000lm compared to 1500lm of standard lamps)
the light emitted at 6500 K is very white, exactly like on cars with LED headlights installed as standard.

LOWER ENERGY CONSUMPTION
The power consumption is only 25W instead of the 55W absorbed by the traditional halogen headlight.
The alternator and the battery of your car will be less stressed thanks to the fact that each lamp reduces the absorption by 60%.

LONGER LAMP LIFE
The simplicity of the components and the very high dissipative efficiency allow this lamp to
exceed 30000 hours of use against the 1000 hours of life of a normal halogen.
The aluminum heatsink has a very high operational efficiency and has allowed to remove the fan, a noisy component
and whose failure causes the premature exhaustion of other LED lamps on the market today.

RESISTANCE TO WATER, DUST AND VIBRATIONS
The lamp is water resistant: being IP65 certified it is completely impermeable to direct water jets and resistant to dust.
The resistance to stress is very high: unlike the halogen lamp, where the filament is sensitive to jolts and vibrations,
the LED is firmly anchored to its base and even high intensity stresses are not a problem.

PROTECTION IN CASE OF ANOMALOUS VOLTAGE:
The system automatically recognizes situations in which the battery has a voltage lower than 9V
and cuts off the power supply to avoid wasting energy.
The same thing happens when the supply voltage exceeds 32V, to prevent this situation from burning the lamp.

APPROVAL
The product itself is approved for sale on the European market.
It can be installed to replace the original lamp in compliance with the Highway Code
if your vehicle is originally fitted with the same type of LED lamp as standard.

IMPORTANT INFORMATION
The information provided by the title or the vehicle product selection tool is of a general nature
and help in choosing the correct lamp for your vehicle.
The user accepts and is aware that he is solely responsible, at his own risk and peril,
of the choice of lamps you need.



BRIXIAMOTO offers the new range of LED bulbs for motorcycles and scooters,
designed to meet the demands of the most demanding motorcyclist,
who wants to invest on the safety of the march during the night hours to see and be seen,
equipping the vehicle with a technology that raises its value and technological content.

Our LED lamp kits can be mounted on scooters, scooters and motorcycles: just consider these parameters:
1) Make sure the motorcycle is powered at a voltage of 12V
2) Make sure which type of bulb is mounted on the vehicle before buying online

WHY INSTALL A LED LAMP?

INCREASE IN ACTIVE SAFETY
The Kit allows faster detection of obstacles on the road surface:
thanks to the deeper and wider beam, which projects the triple of light flow onto the road,
these lamps allow the driver a clear and early detection of any objects, cyclists, pedestrians
possibly present on the roadway, or in the close vicinity.

INCREASE IN PASSIVE SAFETY
in the vicinity of junctions and crossings, the vehicles that are going to cross your trajectory will have a wide margin of notice.
This element involves a reduction in the number of situations in which an emergency maneuver is necessary
and it positively reflects on the safety of travel.

GREATER BRIGHTNESS
The light power is about 3 times greater than the original headlights (4000lm compared to 1500lm of standard lamps)
the light emitted at 6500 K is very white, just like on cars with LED lights installed as standard.

LOWER ENERGY CONSUMPTION
The current consumption is only 25 W instead of the 55W absorbed by the traditional halogen light.
The alternator and the battery of your car will be less stressed thanks to the fact that each lamp reduces the absorption of 60%.

GREATER LAMP LIFE
The simplicity of the components and the very high dissipative effectiveness allow this lamp to be used
exceed 30,000 hours of use against the 1000 hours of normal halogen life.
The aluminum heatsink has a very high operating efficiency and made it possible to avoid the employment of the fan, a noisy component
and whose failure causes the early exhaustion of most of other LED lamps present on the market today.

WATER, POWDER AND VIBRATIONS RESISTANCE
The lamp is water resistant: being IP65 certified it is completely impermeable to direct water jets and dust-resistant.
The resistance to stress is very high: unlike the halogen lamp, where the filament is sensitive to jolts and vibrations,
the LED is firmly anchored to its base and even high intensity stresses do not pose a problem.

PROTECTION IN CASE OF ANOMALOUS VOLTAGE:
The system automatically recognizes situations in which the battery has a voltage lower than 9V and interrupts the operation of power supply.
The same thing happens when the supply voltage exceeds 32V, to prevent this situation from burning the lamp.

HOMOLOGATION
The product itself is approved for sale on the European Market.
It can be installed and be compliant to the Traffic Laws of your Country if your bike in origin comes with the same kind of LED bulb,
and you replace the old LED bulb with this one.

IMPORTANT INFORMATION
The information in the title or in this vehicle product selector tool is for general information purposes
only to help in the choice of the good lamp for your vehicle being understood and accepted that
the customer remains the sole responsible at his own risk for the choice of the lamp (s) he needs.