Read before you buy!
This product is only for people with good knowledge of car mechanics who know how to:
If you don't have the required knowledge, we strongly recommend passing the job to a reputable car mechanic; otherwise, you may cause more damage to your car or even personal injuries !!!
Also, you should perform a chemical head gasket test before use of DrH SuperSeal. It will help to pinpoint the leak source and eliminate the water pump leak, which DrH SuperSeal can't fix.
Bear in mind that old, failing head gaskets may have different types of leaks:
DrH SuperSeal can only fix one type of leak (cylinder to coolant)
Regarding this fact, we don't guarantee that our product will fix every failing head gasket. We only give you a better chance to fix it.
Remember, you use this product at your own risk!!!
If
your car's engine is overheating or losing coolant without visible
signs or just "bleeding coolant" from the radiator, then
the head gasket in your engine is gone. It is a costly repair
(usually hundreds of pounds due to intensive labour involved in the
repair, half of the engine must be dissembled to replace the faulty
head gasket. ) Thankfully we have a better solution than that –
advanced chemical engineering. "Dr Headgasket SuperSeal" in
a bottle, just pour it into the cooling system to fix the
engine!!!
Dr Headgasket SuperSeal permanently fixes blown
head gaskets in seconds by sealing all combustion leaks; repairs blew
head gaskets, warped heads and cracked engine blocks. Most cars with
these types of faults would be scrapped due to expensive mechanic
repair and diagnosis. "DrH SuperSeal" will give a second
life to most cars with these types of faults.
How does it work?
After
pouring the DrH SuperSeal into the cooling system, the fluid
distributes between all cracks and micro holes in the engine. Heat
from the engine activates the chemical reaction in all of the cracks
and seals them with UHTCC (Ultra-High-Temperature-Ceramic-Compound).
Now all of the cracks are sealed completely, and the car is ready to
drive, no more coolant loss, no more stops!!!
How to use
the DrH SuperSeal™A successful repair relies on the correct
diagnosis! After a positive diagnosis. "Drug "A" always work the best for illness "A",
never "B" !!!! Don't waste DrH SuperSeal on an undiagnosed
engine.
1. Test the engine first.
You can test the
engine in two ways:
- by a mechanic with special diagnostic
tools
- yourself by using our inexpensive tester BT-3 primarily
designed to work with the DrH SuperSeal™
If the fluid in the
tester turns yellow, then the engine can be fixed with the DrH
SuperSeal™
If the fluid stays blue, then the cause of the
engine's problem lies somewhere else, faulty thermostat, faulty water
pump. In this case, DrH SuperSeal won't fix it at all.
2.
SuperSeal It.
After a positive test result with BT-3 tester, you
can pour the DrH SuperSeal into the radiator or expansion tank,
switch the interior heating on full and start the engine, leave it
running for approx 1 hour. After that time turn the engine off and
leave it to cool down.
While the engine runs, you may occasionally bleed the cooling system (remove trapped air).
3. Well done!!! Now you can drive
the car!!!
PACKAGING:
This item will be securely
shipped in a padded 'jiffy' style envelope for safe transit.
POSTAGE:
2nd Class tracked
FAQ'S
Q)
What is the success rate of repair with the DrH SuperSeal™?
A)
100% when the fault is confirmed with the BT-3 Head gasket
tester.
Q) What is in the DrH SuperSeal™?
A) DrH
SuperSeal™ is a proprietary blend of chemicals in a way that they
form a UHTTC (Ultra-High-Temperature-Ceramic-Compound) triggered by
heat.
Q) Will the DrH SuperSeal™ block my engine's
cooling system?
A) Our product is a clear liquid. DrH SuperSeal™
does not contain any fibres or particles that can clog an engine's
cooling system. Just remember that the internal heater must be turned
on during the repair and that's it.
Q) Can the DrH
SuperSeal™ be used with an anti-freeze?
A) The DrH SuperSeal™
works well with all types of glycol based antifreeze. If you don't
know what type is in the cooling system, don't worry. DrH SuperSeal™
is
supplied with antifreeze checker/indicator which will "tell you"
compatibility with the DrH SuperSeal™
IMPORTANT NOTE:
Always perform a test before using the DrH SuperSeal™
Q)
How long will the DrH SuperSeal™ last?
A) DrH SuperSeal™ has
been designed to be a permanent fix.
Q) Are there some
problems that DrH SuperSeal™ will not fix?
A) DrH SuperSeal™
will not seal leaks in hoses, rubber seals, water pumps, or extremely
large cracks in the head or block resulting in the vehicle not
starting. If the engine does not run then, DrH SuperSeal™ will not
work as it relies on temperature.
- the best way is to check the
type of engine's fault with the Dr Headgasket™ BT-3 tester
which is specially designed for tests with head gasket sealers, other
chemical testers on the market will not work correctly, they will
indicate false results!
IMPORTANT!!! If the BT-3 tester does not
indicate a combustion leak, then the DrH SuperSeal™ won't fix the
problem at all!!! You must look for the problem somewhere else, water
pump, thermostat, electronic sensors...etc...
Q) What do I
do if I have used an inferior or other product making similar
claims?
A) If you have used an inferior product, you must flush
the radiator with water to clean it before using DrH SuperSeal™.
Q)
What precautions should I take with DrH SuperSeal™?
A) DrH
SuperSeal™ should be kept out of reach of children. Avoid eye or
skin contact. If eyes or skin become irritated with DrH SuperSeal™,
rinse with cold water immediately. If swallowed, do not induce
vomiting. Call a doctor immediately.
Q) Do I need to drain
the coolant system before using DrH SuperSeal™?
A) You need a
clean coolant in the system, old or contaminated with a bit of oil
must be changed first then add the DrH SuperSeal™.
Q)
What if I have an oil leaking?
A) Gasket Fix will not fix oil
leaks; only coolant related leaks can be repaired.
Q) Do
I need to flush the coolant if I am using DrH SuperSeal™ a second
time as it initially did not work?
A) If the coolant was fresh
and clean, just add the DrH SuperSeal™, if dirty or old then flush
it first.
Q) How many bottles do I need?
A) Engines
up to 2.0L = 1 Bottle
Engines 2.0L-4.0L = 2 Bottles
Engines
over 4.0L = 3 Bottles
* Terms and Conditions
Any
Guarantee claims must be sent to; https://www.drheadgasket.co.uk/
1)
Guarantee refunds will only be issued with a letter from a VAT
registered & licensed mechanic stating that the product failed to
fix your head gasket, this letter must include the vehicle
registration details along with what tests were done to ascertain the
product's failure.
2) Only one refund per vehicle.
3)
Refunds will only be issued on the basis that the gasket fix usage
directions were followed properly.
4) Refunds will only be
issued for the recommended amount needed for your engine size, to a
maximum of 3 bottles excluding postage and packing
5) You must
contact us within 35 days of purchase, after this time, we will not
initiate a refund.
6) Once we have issued a refund cheque and
provided you with the registered mail tracking details, this will be
tended as a full and final settlement of any failure/fault claims
resulting from the use of DrH SuperSeal™ which will be deemed to be
accepted by you and therefore be contractually binding. No further
discussion will be entered into.