Up for Sale is a Custom made to your Measurements
Sunbrella of your Choice
Hatch Cover Cover
Up to 30 inches X 35 inches X 2 inches Tall
These Covers are Made with UV Thread and Real Marine Grade Sunbrella
This Cover are Easy on/ Easy off Covers
With Bungees Cord that is Sewn into the bottom of each Side and Will exit out the Center of one of the sides
So when you Pull and Tighten the Bungee it will go around the outside of the Hatch, including any Hinges that might be Exposed
And pull under the lip of the Hatch to hold the cover in place..
Now we need you to go to your boat
And take, these measurements
A. - B.
How Long, How Wide is your Hatch
C.
Diagonally, Top Corner to Corner just the top
Right at the point where the frame starts to turn or Flare downward
D. How Tall, are the Side
E. - F
This measurement we need to know how much, Sunbrella will be need to go from one side to the other including the sides
what Is the Total length including the sides and anything like hinges
Start at the bottom, at Deck, go up the side of the hatch include anything like Hinges that mite be on the outside of hatch, across the Top, and Back down.
This should be the total Sunbrella, need to cover everything
What is this Measurement
Now
Sometimes The Hinges are exposed,.
E would include this measurement
Tell us
The Color of Sunbrella and the Color of Thread.. you want us to use to make this cover
All are custom made to order
If you need more than one
Or if you are looking for a size not listed
Please let us know and we will list them all for you..
What we need you to do
To give us the best measurement
You can
Please do not round the measurements off to the highest or lowest
Please give us exactly what the Measurement
Please don’t send us photos of your tape measure
EBay photos can’t be enlarged to read
You could always send us a small drawing...
SunGuardCanvas@gmail
if you should need small size or more than one cover we can do that!
PLEASE ASK ANY QUESTION YOU HAVE AND I WILL TRY TO ANSWER THEM ALL.,
Thanks for looking