Product description:
1 channel relay module
Maximum load: AC 250V/10A, DC 30V/10A
Trigger current: 5mA
Working voltage: 12V
Module size: 50x26x18.5mm (L x W x H)
Four mounting bolt holes, diameter 3.1mm
DC +: positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be high or low level relay
NO: normally open relay interface
COM: Common Interface Relay
NC: normally closed relay interface
2 channel relay module
1 Dimensions: 50.5mm(length) * 38.5mm(W) * 18.5(H)
2 weight:. 31g
PCB Color: Black
4 board four weeks with four screws holes, hole diameter 3.1mm, easy to install and fixed
5 high quality loose music relays SPDT. One common terminal, one normally open, one normally closed terminal
6 optocoupler insulation, good anti-jamming
7 low pull, high release. Energisation status indicator light, release status LED off
8.VCC of system power, JD_VCC relay power. You can plug in sweaters
Electrical parameters:
Supply voltage: 5VDC, 12VDC
Current: more than 100mA
Load: 250V 10A AC or 30V 10A DC
Wiring:
VCC: positive power system
GND: System power negative
IN1 - IN2: relay control ports
4-channel Relay Output modules, Relay Output contacts 250A 10A. Input IN1, IN2, IN3, IN4, The signal line LOW Effective. VCC, GND Power, Can Relay A separate Power Supply Relay Power Input of JD-VCC.
Applications:
1, Support All MCU control.
2, The Industrial Sector;
3, PLC Control;
4, Smart home Control
6 channel relay module
1. maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. light (green), relay status indicator (red);
Module interface specifications:
1. DC + : DC power supply positive pole
2. DC- : DC power supply negative pole
3. CH1 ~ CH6 : : relay signal triggering pin
Relay output:
1. normally closed pin (NC1 ~ NC6) : relay normally closed pin
2. Common pin (COM1 ~ COM6) : relay common pin
3. normally open pin (NO1 ~ NO6) : relay normally open pin
8 channel relay module
Features
Use high-current relay, AC250V 10A DC30V 10A
Contact some independent wiring, safe and reliable
Standard interface, can be expanded into a variety of development board
With fixed screw holes for easy installation
Suitable for a variety of platforms such as 51/AVR/AVR/ARM
Module Description:
1, the module conforms to international safety standards, tax control area and regional insulation tank;
2, with double-sided FR-4 circuit board design, high-end chip manufacturing process;
3, using loose music authentic relay control;
4, with the relay instructions, pull, disconnect does not shine;
5, the signal input has a low signal, often start a common terminal will be enabled;
6, the relay can control the various devices and load;
7 , 8 and 8 normally open normally closed contact;
8, blue KF301 terminals to the control line is more convenient.
9 , Module size: 138m * 56mm * 18.5mm ( L * W * H ) , Weight: 120g
10 with 4 fixing bolt holes, hole 3.1mm, pitch 131mm * 49.5mm
11, finished by 100% functional testing and stability testing
Two module interface:
1, VCC: 5V power supply connected to the positive
2, GND: 5V power supply connected to the negative
3, IN1-IN8: trigger signal, active low
Relay outputs: a 12-line interface, the interface can be directly connected to all leads, user-friendly
1, NO1 - NO8: normally open relay interfaces, relays for the vacant after the pull shorted with COM
2, COM1 - COM8 Relay Common Interface
3, NC1 - NC8: normally closed relay interface relays short-circuited with COM ago, after the pull vacant