Fan halfwave dipole antenna: 80/40/20 meters

  • 3-Ft-240/31 cores 
  • Wound with #12awg magnet wire 
  • All stainless steel hardware
  • Poly-Stealth 13 wire used for the legs
  • All connections crimped and soldered 
  • Adhesive lined heat shrink covering all connections

The 3 element fan dipole works very well at covering all the bands 80-6 meters, while using a tuner on the non-resonant bands reduce power.

 This antenna will be custom made for you.
 
HF (1.8-30 mHz)   3-cores FT-240 31  50 ohm input COAX fed. 5KW/SSB
2KW/CW/RTTY.
Where it is resonant, if using a tuner reduce power as to not saturate the cores.

Poly-Stealth 13  used for the elements ie. legs. 


Advantages to Poly-STEALTH  High Strength Aerial Wires

  • Ideal balance of strength and flexibility
  • Low-Gloss finish and small size makes wire disappear into the background
  • Superior abrasion resistance for running through trees
  • UV & Weather resistant for use on the seacoast or in other harsh environments subjected to acid rain, high wind, or high snow and ice loads.

Simply move the dog bone up or down the Poly-Stealth to your desired frequency. 

This antenna can be hung either in a Flat-Top or Inverted V configuration.

 Total approximate  length 130'. 
 
Every connection crimped, soldered and adhesive lined heat shrink covered.
 
Legal Limit ++++++++
 
Add your 50 Ohm coaxial feed line, suspension rope and go.
 
NOTE *** A wide range tuner can be used to tune this antenna to 80-6 meters