REAR PINION SEAL  
for
7.5" and 8.8" RING GEAR FORD AXLE


FORD  BRONCO  1983-1996
FORD  BRONCO II  1984-1986
FORD  CROWN VICTORIA  1993-2009
FORD  EXPEDITION  1998-2018
FORD  EXPLORER  1991-2010
FORD  EXPLORER SPORT  2002-2003
FORD  EXPLORER SPORT TRAC  2003-2010
FORD  F-100  1983
FORD  F-150  1984-2018
FORD  F-150 HERITAGE  2004
FORD  F-250  1986-1999
FORD  MUSTANG  1979-2013
FORD  RANGER  1983-2009
LINCOLN  AVIATOR  2005
LINCOLN  LS   2004-2005
LINCOLN  MARK LT  2006
LINCOLN  NAVIGATOR   1998-2014
LINCOLN  TOWN CAR  1984-2010
MERCURY  GRAND MARQUIS  1975-2011
MERCURY  MARAUDER  1970-2004
MERCURY  MOUNTAINEER  1997-2010


Flanged Outside Diameter (Inch): 3.150
Flanged Outside Diameter (MM): 80.000
Helix Type: Clockwise-Spiral Lip Design
Housing Bore (Inch): 2.777
Housing Bore (MM): 70.540
Inside Diameter    1.812 in.
Inside Diameter    46.020 mm
Material: Fluoro-Elastomer
Outside Diameter: 2.783 in.
Outside Diameter: 70.690 mm
Outside Diameter (Inch): 2.783
Outside Diameter (MM): 70.690
Overall Width with Side Lip (Inch): 0.591
Overall Width with Side Lip (MM): 15.000
Redicoat: Yes
Series: 3000
Shaft (Inch): 1.812
Shaft (MM): 46.020
Thickness: 0.455 In.
Thickness: 11.560 mm
Type: 86
Unit of Dimension: Inch
Width (inch): 0.455
Width (MM): 11.560

IMPORTANT INFORMATION: 

1. Shipping charges are for the UK or EU mainland only. All other destinations ie. islands or rural/isolated areas may be a subject of courier surcharges or different tariffs at all.

2. Delivery / Courier delays - We do NOT accept any liability / responsibility for delayed deliveries by the couriers. We try our best to get the goods to the customer on time, but  please note that delivery time specified on our listings are only estimate, and may vary under certain circumstance, for example festive seasons like Xmas, Easter, bad weather conditions etc. 

3. All components should be fitted with the professional manner by a professional garage and authorised person, and every component should be inspected before the installation, in case of noticeable defect it should be immediately reported, and under any circumstances the component should not be fitted until replaced.

4. All  parts are covered with 1 year warranty.

5. Please note that any labour costs claimed on the faulty goods will not be accepted.

6. All fitment applications shown are as per actual vehicle model year, not as indicated by the vehicle reg. number.

7. Please DO NOT rely on eBay vehicle compatibility list as it is very inaccurate. Read our item description, and in case of any questions please do not hesitate to email us or to call us directly.