EZ Mount™ Static Cling Foam Mount (1 Sheet)
 

This listing is for 1 Sheet of 8-1/2"x11" EZ Mount™ Premium Static Cling Mounting Foam.  With a 1/8" foam thickness, this mounting cushion is so "EZ" to use and is the best way to mount un-mounted rubber stamps, so that it can clings perfectly to an acrylic block.

1. Simply peel the printed blue liner to expose the adhesive side of the foam and mount to your rubber stamp.

2. Trim the excess rubber and foam close to the design with a pair of scissors.

3. Remove the paper liner from the other side, which will expose the static cling.

4. Your stamp is now ready to be temporarily mounted on an acrylic block for stamping.

It's that simple!  Once your stamps are mounted with EZ Mount™ you can use the same acrylic blocks over and over without leaving any sticky mess.  EZ Mount™ will always stick to a smooth clean surface and works with all un-mounted stamps.

Want to SAVE Space?  Convert your wood mounted stamps using these EZ Mount™ Clinging Foam.

1. Place wood mounted stamps in your microwave for 5-15 seconds depending on the size of your stamp.

2. The glue should be loose enough to peel the rubber away from the foam.  Rub off any left over glue and clean with alcohol.

3. Cut out a piece of EZ Mount™ foam a little bigger than your stamp with scissors

4. Peel the printed blue liner to expose the adhesive side of the foam and mount to your cleaned rubber stamp.

5. Trim away excess foam to the rubber.  This will make yoru scissors sticky so clean them as needed with alcohol.

6. Remove the paper liner from the other side, which will expose the static cling.

7. You are now ready to use your EZ Mount™ stamp with acrylic blocks or store it on Stamp N' Stor™ storage panels (sold separately).

Calling all Stampin Up! collectors.  This is an ideal product if you have a huge collection of stamps!  It'll definitely save you storage space and makes it very portal to take more stamps to parties or crops.  If you haven't adhere your mounted rubber stamp onto their wood blocks yet, consider getting the EZ Thin Mount™ (sold separately).  The EZ Thin Mount™ has a thinner cushion (1/16" thick), so you don't have to remove the rubber from the foam.  Just peel, stick, trim and your ready to go.

Please Note:  It is not recommended that you store any of your EZ Mount™ Stamps on Acetate Sheets. Acetate is made with chemicals that will react with EZ Mount™ and any other cling cushion type product, making an almost permanent bond between it and the cling.