HDi is proud to release the all new manual boost controller Type -- R HDi-MBC-R
The boost controller is specially designed with the effective Ceramic Ball Spring Regulator ( CBSR TM ) effectively reduced the friction and the reaction time takes in relation to the boost regulation i.e. reduce boost over shoot which most manual boost controller have.
By utilising ceramic ball which have low thermo resistance and have long lasting wears resistance in order for maximum life expectancy.
It is made of T-6061 light weight high strength aluminium to limit thermo expansion in the engine bay.
HDi EBC-R is suitable for all kind of turbo set up both internal and external wastegate. Installation is extremely simple just connect it in between the turbo compressor housing and the wastegate.
Adjustment is also simple, turn clockwise to increase boost and counter clockwise to decrease boost.
Operation: turn top adjustment knob clockwise to increase boost counter clockwise to reduce boost
installation:
1. Make sure the adjustment knob is as far as possible but before it is separate from the main body than turn
the adjustment dial in 2-3 turn clockwise as for the base starting point.
2. Connect the MBC-R according to the diagram with the shortest possible vacuum hose connection and away
from heat most of the standard turbo system is similar the internal wastegate shown in the diagram. please
note some extra parts may be needed for non basic turbo configuration and can be purchase from
www.hybrid-power.com.
3. Connect the bottom port of the boost controller to the boost source. It can be manifold or turbo compressor.
4. Connect the side port (marked with a triangle sign) of the boost controller to the wastegate. Make sure you
cable tight all the vacuum hoses
5. Recheck all the connection, warm up the car and driver and drive moderately monitor the boost level at this
stage you boost should be similar or lower than your standard boost, if so you can start turning the
adjustment dial clockwise to increase boost (we recommend do it on a Dyno make sure it is adjust by a
professional, best is with full throttle 3000-4000 rpm in 3rd gear)and repeat the step 5 till the desired boost
is reached.
Warning:
Boost controller is a device to increase boost and over boosting will cause catastrophic engine failure it is
recommended perform installation and adjustment by professional with correct fuel and ignition timing monitored.
Please note the insurance is only be claimed if you have purchased before shipping and it is claimed by the buyer.
As the goods are very low cost it arealy incur any other charges and taxes but in a event of charges happened all other cost such as duty or local tax are not included in the postage.
As we are a drop shipping company shipping location is depends on the supplier and we will be informed by the supplier of where and when the goods is shipped from and in which warehouse
The delivery time will take 6-10 days.
We strive to sell the best product at the best price giving you maximum value in your purchase. All Products are tested before it is sent out. As you can see we have sold hundreds from our history and feedbacks, If you suspect a problem with the product please advice us if it is installed by a professional and send us the contact information of the professional installer, we will call them or email with them to find out what exactly the problem is, alternatively you can also send it back to us we can check it for you , if we found no problem with the unit we will send it back to you at your cost, but the checking is free, if it is found damaged by improper installation , we will quote you for the cost to repair or replace and return it to you at your cost , if it is found defective we will repair or replace a new one and send it back to you at our cost. Please make sure you send the return details and the address properly and the reason for sending it back
If you are dissatisfied with your purchase, simply return it to our warehouse (email us for the address) in its original condition (opened or installed products can not be refunded) and we will refund your purchase price (less shipping and 20 % restock handling cost).
HDi is proud to release the all new manual boost controller Type -- R HDi-MBC-R
The boost controller is specially designed with the effective Ceramic Ball Spring Regulator ( CBSR TM ) effectively reduced the friction and the reaction time takes in relation to the boost regulation i.e. reduce boost over shoot which most manual boost controller have.
By utilising ceramic ball which have low thermo resistance and have long lasting wears resistance in order for maximum life expectancy.
It is made of T-6061 light weight high strength aluminium to limit thermo expansion in the engine bay.
HDi EBC-R is suitable for all kind of turbo set up both internal and external wastegate. Installation is extremely simple just connect it in between the turbo compressor housing and the wastegate.
Adjustment is also simple, turn clockwise to increase boost and counter clockwise to decrease boost.
Operation: turn top adjustment knob clockwise to increase boost counter clockwise to reduce boost
installation:
1. Make sure the adjustment knob is as far as possible but before it is separate from the main body than turn
the adjustment dial in 2-3 turn clockwise as for the base starting point.
2. Connect the MBC-R according to the diagram with the shortest possible vacuum hose connection and away
from heat most of the standard turbo system is similar the internal wastegate shown in the diagram. please
note some extra parts may be needed for non basic turbo configuration and can be purchase from
www.hybrid-power.com.
3. Connect the bottom port of the boost controller to the boost source. It can be manifold or turbo compressor.
4. Connect the side port (marked with a triangle sign) of the boost controller to the wastegate. Make sure you
cable tight all the vacuum hoses
5. Recheck all the connection, warm up the car and driver and drive moderately monitor the boost level at this
stage you boost should be similar or lower than your standard boost, if so you can start turning the
adjustment dial clockwise to increase boost (we recommend do it on a Dyno make sure it is adjust by a
professional, best is with full throttle 3000-4000 rpm in 3rd gear)and repeat the step 5 till the desired boost
is reached.
Warning:
Boost controller is a device to increase boost and over boosting will cause catastrophic engine failure it is
recommended perform installation and adjustment by professional with correct fuel and ignition timing monitored.
Please note the insurance is only be claimed if you have purchased before shipping and it is claimed by the buyer.
As the goods are very low cost it arealy incur any other charges and taxes but in a event of charges happened all other cost such as duty or local tax are not included in the postage.
As we are a drop shipping company shipping location is depends on the supplier and we will be informed by the supplier of where and when the goods is shipped from and in which warehouse
The delivery time will take 6-10 days.
We strive to sell the best product at the best price giving you maximum value in your purchase. All Products are tested before it is sent out. As you can see we have sold hundreds from our history and feedbacks, If you suspect a problem with the product please advice us if it is installed by a professional and send us the contact information of the professional installer, we will call them or email with them to find out what exactly the problem is, alternatively you can also send it back to us we can check it for you , if we found no problem with the unit we will send it back to you at your cost, but the checking is free, if it is found damaged by improper installation , we will quote you for the cost to repair or replace and return it to you at your cost , if it is found defective we will repair or replace a new one and send it back to you at our cost. Please make sure you send the return details and the address properly and the reason for sending it back
If you are dissatisfied with your purchase, simply return it to our warehouse (email us for the address) in its original condition (opened or installed products can not be refunded) and we will refund your purchase price (less shipping and 20 % restock handling cost).
On 22/09/2022 at 21:01:55 AEST, seller added the following information: