boostprojects-header2

Edelbrock Victor Jr. 289-351W Cylinder Head W/Valves for Ford Small Block 77179

Description

BRAND NEW IN BOX  

DETAILS:

The Edelbrock 77179 Victor Jr. Small Block Ford cylinder head offers high horsepower potential on competition level engines and are compatible with OE valve train and pistons for bolt-on convenience. VICTOR JR. 20deg - 210cc FEATURES: 500+ horsepower potential out-of-the-box using stock valve train geometry High-flowing 210cc intake ports and .130" raised 75cc exhaust ports Available with 60cc or 70cc combustion chambers 70cc combustion chambers are ideal for turbocharged and supercharged applications CNC gasket-matched port entries/exits with blended valve bowls Spark plug holes and valves are in the stock location Valve cover rail raised .150" A relief in the head allows most roller lifters to be changed without removing the head


SPECS:

Availability

Available

Application

Application Specific

UPC

00085347771790

Ech Ival Dia

2.05 in

Series

Victor Jr.

Quantity

Sold Individually

Guide Plate Material

Hardened Steel

Horsepower

350-600 HP

Availability Note

Available

Warranty

12 Months

Seat Angle

Exhaust 45 deg/Intake 45 deg

Emissions Code

Racing Only

Hazardous Materials Warning

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm.

Installation Notes
  • Check cam manufacturer's specs for compatibility with valve springs. Recommended valve sizes listed. Match with Edelbrock head gasket sets. Use Head Bolt Kits for easy installation. These heads require the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat range appropriate to your application. Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter: 5/16" (width of slot in guide plate).

CNC Ported

No

Combustion Chamber Volume

60 cc

Deck Height

9.5 in

Deck Thickness

0.625 in

Exhaust Valve Diameter

1.60 in

Guide Plates Included

Yes

Intake Runner Volume

210 cc

Material

Aluminum

Push Rod Diameter

(Suggested) 0.3125 in

Rocker Stud Diameter

0.437 in

Valve Angle

20 deg

Valve Stem Diameter

0.3438 in

ABOUT THE MANUFACTURER : 

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.

Edelbrock Corporation has six locations: Three in Torrance California, two in San Jacinto, California, and one in Sanford North Carolina totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support. Less than a mile away is Russell Plumbing and our Distribution Center.

Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called "the most state-of-the-art sand cast foundry west of the Mississippi." This investment in American facilities is part of our commitment to "Made in USA" products and performance.

Ask us about saving money with our PACKAGE DEALS
CP Cometic ACL Ferrea and ARP KitsCustom Made Package Deals
AEM Package DealsPackage Deals
Ask us about combining purchases for package deal auctions
  • Pistons
  • Rods
  • Bearings
  • Head and Main Studs
  • and more...

Shipping

  • We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
  • We also offer expedited shipping at an extra cost.
  • International shipping rate applies to addresses in all other locations
  • Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
  • Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
  • There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
  • We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
  • Ebay Promotional Shipping is good for shipments going to 48 lower states only.
  • We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
  • Shipping charges are non-refundable.
  • We will gladly combine shipping charges to one charged based on the total weight of the package.   OFE

Payment & Return

  • We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. 
  • Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.
  • International Buyers, please contact us before bidding to discuss the shipping cost.
  • We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.

If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.