PLEASE ENSURE THIS WILL FIT YOUR LAMP BEFORE  YOU PLACE AN ORDER. PLEASE READ BELOW CAREFULLY-THANK-YOU. MIS-ORDERED ITEMS ARE NOT RETURNABLE.
THESE ARE HAND-MADE TO ORDER........allow 24 hour despatch please.

IMPORTANT SAFETY INFORMATION! PLEASE READ BEFORE PURCHASE

THESE READY-WIRED KITS ARE CAREFULLY AND INDIVIDUALLY MADE TO ORDER FOR YOU, EVERY POSSIBLE SAFETY PRECAUTION HAS BEEN CONSIDERED IN THE CONSTRUCTION- HOWEVER, IT IS POSSIBLE TO DAMAGE THIS KIT BY OVER-TWISTING THE FLEX OR PUTTING UNDUE DOWNWARD STRESS ON THE FLEX AND PULLING A CONNECTION OUT OF THE INTERNAL CONNECTOR BLOCK SWITCH.

ALL FINISHED KITS ARE PHOTOGRAPHED BEING SAFETY TESTED ON THE WORKBENCH THEREFORE I WILL ACCEPT NO RESPONSIBILITY WHATSOEVER FOR ANY INABILITY TO CORRECTLY INSTALL THE KIT ONTO A FINISHED LAMP, THEY ARE OFFERED AS EASY-FIT SPARE PARTS ONLY. 

PLEASE!! IF YOU ARE IN ANY DOUBT AT ALL-CONSULT A TRADES PERSON OR ELECTRICIAN       

 A complete ready to fit rewire kit for WOODEN STANDARD lamp bases. THIS IS UNLIKELY TO FIT METAL STANDARDS. Send me photos of your lamp if you are in any doubt of fitting viability. The kit can be supplied with a brass coupler for metal lamps if so required instead of the wood mounting plate.
Comprises of a Solid brass switched lamp holder BC (bayonet), and a solid brass wood mounted back plate and screws. Lamp holder and back plate are 10MM threaded. IF YOUR WOODEN BASE HAS A 1/2” NIPPLE THREAD FITTED LET ME KNOW, I can supply with 1/2” lamp holder base instead.
Pre-wired to the holder is 3.5 metres (around 11 feet) 3 core 0.5mm Doncaster branded British-made gold flex,  and a 3A fused BS1363 UK black plug top is the only thing you need to fit. All cable ends are supplied heat shrunk and crimped with ferrule ends so will not fray.
If you are looking to convert a non-standard type of lamp base, this may not fit, and you should seek advice if unsure before purchasing. This kit is designed purely for a wooden standard.

All you need to do is screw on the new brass plate, carefully thread the flex through shaft and fit the plug.  I SUPPLY A BASIC GUIDE WITH THIS KIT-don’t remove old flex yet...it may aid rewiring.
Super simple! (Read below please*).

*SAFETY:PLEASE READ CAREFULLY. All kits are assembled to a high standard and are photographed working and P.A.T tested before shipping ensuring they leave me working and in an electrically safe condition, however, this CANNOT apply to finished lamps, especially if they are fitted to a third party's property. You will need to have the finished lamp re-assessed by a qualified electrical outlet if you need a certificate label.
The switch is now tested 10 times to ensure reliability.

THESE ITEMS ARE STRICTLY SOLD AS SPARE PARTS, AND NO RESPONSIBILITY ON MY PART WILL BE ASSUMED FOR ANY INABILITY TO CORRECTLY FIT THEM. They are sold as spares and NON-REFUNDABLE. Any damage incurred to this spare or the lamp it is fitted to is entirely down to user. Please-if in any doubt - consult a qualified trades person. 

UK tracked 48 small parcel rate.