The Rear Bumper Protector Co are
the only company authorised to use the material Hydroturf
(EVA-Ethylene-Vinyl-Acetate) for bumper protectors within the UK, it is manufactured
to 70 degrees and is backed with 3M adhesive, no other product can boast this.
The material is exclusive to our company.
Please do not “slip up” and buy a
cheaper imitation product, insist on a Hydroturf protector from the market
leaders.
We also supply front foot-well mats and sliding side door mats in the same hard-wearing material. To purchase please visit our Ebay shop.
Ebay item number: 285281529127 (Footwell mats)
Ebay item number 285281535614 (Sliding door mat)
Cover your Fiat Scudo - Peugeot Expert - Citroen Dispatch Rear Bumper with the Hydroturf Rear Bumper Protector Kit.
2017 +
THE MOST COST EFFECTIVE BUMPER STRIP ON THE MARKET AT JUST £32.50 DELIVERED !
. MILITARY GRADE, AS USED BY THE BRITISH ARMY
. 3.5mm IN THICKNESS
. MADE FROM EVA - Ethylene-Vinyl Acetate
. EXTREMELY GRIPPY, EVEN WHEN WET (UN-LIKE THE METAL & PLASTIC TYPE)
. CUSTOM CUT FOR THE PERFECT INSTALLATION & WITH FITTING INSTRUCTIONS
. GIVES YOUR VAN THE FINISHING TOUCH & RETAINS IT'S RE-SALE VALUE
NO DRILLING REQUIRED - THE WHOLE STRIP IS BACKED WITH 3M ADHESIVE
Unlike other bumper protectors made from plastic or metal, EVA actually becomes grippier when wet, it's extremely hard wearing and makes any grubby, scratched bumper look like new.
Please make sure that your bumper is level and that it hasn't been involved in an accident before ordering, this could result in the door or doors fouling the bumper strip.
For £32.00 you're getting the bumper strip (not the actual bumper).
Comes boxed with clear fitting instructions, alcohol adhesive promotor wipe and VAT receipt.
A small selection of our 100% feedback from our valued customers.
Thanks very much it is a great product i used it on my last van and so there was only one choice when it came to a step protector for my new van. kirkbia (55)
RENAULT TRAFIC '15 - '23 REAR BUMPER PROTECTOR "OVER THE EDGE”
Wow fast delivery 🚚top quality & good price,excellent customer service & communication,👌🏻Keep up the good work ⭐⭐⭐⭐⭐archerjoinery1-uk (689) VW T4 REAR BUMPER PROTECTOR
Excellent ebayer ,highly recommended,Thankyou for being so prompt. sandals56 (624)
MERCEDES VITO / VIANO '03 - '15 REAR BUMPER PROTECTOR OVER THE EDGE
Product exactly as described. Delivered and packaged well. Arrived 10 days earlier than predicted. A+ ebayer vfrrider46 (429)
CITROEN DISPATCH, REAR BUMPER PROTECTOR 2017+ ON THE TOP
Just delivered, cleaned and heated with a hot gun as per instructions......Looks well tidy!
VW T5 REAR BUMPER PROTECTOR / NON SLIP SAFETY TREAD STRIP dono2096 (484)
You will require the following items to fit your Rear Bumper Protector.
Hairdryer or Heatgun Gloves and Hot Soapy Water
IMPORTANT – Please read the following instructions to make sure you fit the bumper strip/foot mats correctly.
- Put your gloves on.
- Clean the bumper thoroughly with hot soapy water, now dry completely with a heat gun or hairdryer.
- Wipe the bumper with the alcohol cloth provided and wait 5 mins.
- Peel the paper off the back of the bumper strip and carefully place it in the correct position onto the bumper.
- With a heat gun or hairdryer gently heat the entire bumper strip, especially around the edges. The bumper strip will become soft and if you have ridges on the surface you need to gently press the bumper strip over them. When it cools down it will keep its shape.
For "Over the Edge" Bumper Strips: As Above plus the following points:
- Gently heat the bumper strip with a heat gun or hairdryer long-ways through the middle so it starts to bend at least 45 degrees over the edge of the bumper.
- With your fingers (wear gloves) press firmly over the bumper especially around the edges.
Reasons why the bumper strip may not stick: Temperature is too cold. The bumper has not been cleaned enough. Not enough heat applied to the bumper. Brand new bumpers are often sprayed with silicone from the factory (needs extra cleaning).
- After cleaning the bumper, heat with a heat-gun or hairdryer.
- Warm the bumper so it moulds over the ridges.
- If fitting an over the edge style warm the edge so it folds over.
The Rear Bumper Protector Co is part of the Line One Distributors group of companies, we have been successfully trading since 1979. Our warehouse is based in Cirencester, Gloucestershire where all the bumper protectors are produced, professionally packed and dispatched the same day of ordering. We pride ourselves on giving a first class service because that is what we would expect as a customer ourself.
You can either pay via Paypal through eBay, Bank Transfer or Credit/Debit card.
All orders are packed and dispatched on the day of ordering. Individual bumper protectors and pairs are dispatched via Royal Mail 2nd Class post, quantities of three or more are dispatched via UPS 24hr delivery.
If for any reason you would like to return your order please follow the eBay returns procedure by going to "My Purchases" – "Return this Item".
For any queries, please contact us via the eBay messaging system and we will endeavour to get back to you as soon as possible.