Oil Pan Gasket  -  "ULTIMATE" SILICONE

for 

Dodge 5.9L Cummins Diesel - 12 & 24 valve

"ULTIMATE" SILICONE IS FIBERGLASS REINFORCED SILICONE. 



-    A layer of fiberglass is centered between 2 layers of silicone 

     and gives the material dimensional stability and 

     higher tensile strength. 

 

-    Additionally, the gaskets are made from aerospace mechanical

     grade silicone and will not break down and deform or crack up

     like cork or neoprene.

 

-    It will withstand operating temperatures from -100 to

     500 degrees F.   

 

-    The material is resistant to deterioration by weathering and 

     engine oil and remains flexible over the temperature 

     range noted.

 

-    Re-usable gasket.

This may be the last gasket you will ever need to buy! 


FITS:   

Dodge 5.9L Cummins Diesel

- 12 valve and 24 valve

1989 - 2002


Part #:  RG-OS34102FR 

One gasket

Gasket is 1/8" thick "Ultimate" silicone.

Reusable.


INSTALLATION INSTRUCTIONS:

Remove all traces of oil by washing the block and oil pan surfaces with solvent.  

The gasket must be installed DRY - do not use oil or lube of any type.

 

TORQUE TO 45-50 INCH POUNDS


DO NOT OVERTIGHTEN!

Over tightening makes the gasket bulge or squeeze out.

If that happens then back off on the torque.

 

 

TO REUSE GASKET:

Wash gasket briefly in hot water and soap.

Rinse well and dry all surfaces thoroughly.

Re-install using the above installation instructions.

 

DO NOT SOAK IN SOLVENT OR GASOLINE.


Don't worry - instructions come with the gasket.

 

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

USE CORK?      GET REAL!      REAL Gaskets that is…


REAL  Gaskets Tennessee is a manufacturer of silicone rubber gaskets 

for 

aircraft, automobile, and motorcycle engines.


Our silicone rubber gaskets are made from aerospace mechanical grade 

AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit

and to last the life of the engine. 


Our gaskets seal uneven surfaces, eliminate corrosion and 

are 100% reusable.


We manufacture valve cover gaskets for:


Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and 

Wright radial piston aircraft engines.


Automobiles: Ford, GM, Mopar, Porsche and VW automobile 

engines.


Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, 

Moto Guzzi, Norton, Triumph, Saab and most other 

motorcycle engines.



If you are tired of oil leaks, then a silicone rubber gasket is 

the only way to go, and REAL Gaskets Tennessee is 

the only place you can get “The Original” 

silicone rubber gasket.


MADE IN THE USA.