Product Features:

1. Stereoscopic imaging. Display the information three-dimensionally through the translucent semi-reflective lens. No reflection, zero ghosting, and clearer display during daytime.

2. Powerful and practical function display, such as speed, water temperature and voltage, etc. HUD could eliminate the fault code displayed on the engine dashboard without professional equipment.

3. Early warning of the high water temperature and low voltage to avoid Car breakdown.

4. OBD2+GPS dual mode is suitable for all car models.

5. With Bluetooth Live Navigation, APP supported: Wins

Navigation system use

Please search Wins in App store to download . or scan the below QR code to download and install. Steps as below.

1.Confirm the APP installed successfully, and HUD is working. Open the mobile Bluetooth,GPS,internet. Click the Wins App,the mobile phone will auto connect with the HUD via Bluetooth.

2.If the mobile phone cannot connect to the Bluetooth device correctly, please follow the instructions below: HUD host needs to display normally. If the OBD system is unable to connect, please switch to the GPS system,and display normally. Check the mobile Bluetooth whether connected to other devices or not, if yes, please delete the paired Bluetooth device, and connect to WYHUD

3. Turn off the Bluetooth and then turn it on, or restart the phone (for more questions, please refer to the troubleshooting)

Compatible Attention: OBDll only be available for vehicles produced after 2008. GPS MODEL Perfect Suitable for All Vehicle. ( If your car is not compatible with OBD mode, please use GPS mode.)Dual System, Change free.OBDll mode is not compatible with hybrid electric vehicle,diesel car, pickup truck, RV, computer modified car,it is recommended to use the GPS mode.

Wide Compatibility: available for cars with OBD2 and EUOBD port, plug and play;

Attention:
The OBD2 mode are not compatible with following cars:
- European and American cars manufactured before 2008 and Asian cars manufactured before 2008.
- American cars produced before 2008 and all Dodge, JEEP, Sail, Chrysler cars.
- France cars manufactured by FAT,DS,PEUGEOT,Citroen,Renault,Simka, Amirka
- Japanese cars: Suzuki,  Mazda, Infiniti (QX50, Q50, Q501), Toyota avanza 2013, Lexus (is250,  ex250, ES300H), Honda (jazz, CRV) are not compatible. And all Japanese  cars before 2008 are not compatiable.
- Some models of Kia and Hyundai cannot use this OBD2 HUD (2013 Hyundai Sonata, 2017 Kia Soul PS, etc.)
- Oil-electric hybrid and some diesel vehicles cannot use OBD2 HUD, GPS HUD are recommended.
- Pickup Trucks and Modified ECU vehicles are not suitable for this HUD.
- GPS mode compatible with all vehicles.

If you are not sure this product is suitable for your car or not, please contact us before ordering, thank you!

Package Include:

1 * HUD Main Unit
1 * Car Charger
1 * Non-slip Mat
1 * Reflective Film
1 * User Manual
1 * Original Box

    1. OBD mode information display: vehicle speed, water temperature, voltage, fuel consumption, RPM, single mileage, total cumulative mileage, travel time, driving direction, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, acceleration test, brake test, read data stream, Navigation.
Alarm: Overspeed alarm, Speed alarm, High water temperature alarm, Low voltage alarm, Engine fault alarm, Clear fault code, Free switching between kilometer and miles, KM/h & MPH Switch freely, °C & ℉  switch freely.
   2. GPS mode information display: speed, travel time, satellite time, altitude, number of satellites, driving direction, single mileage, voltage, acceleration test, brake test. Navigation
Alarm: Overspeed alarm, Low voltage alarm, Free switching between kilometer and miles.
   
Specifications:
Material: ABS
Colour: Black
System: OBD2+GPS dual mode
Ambient temperature: -40°C -80°C atmospheric pressure 86-106kPa
Relative humidity: 10%-95% Environmental noise ≤60dB(A)
Alarm level: ≥30dB(A)
Working voltage: 11~18VDC (12VDC/200mA)
Product size: 110*77*42mm/4.33*3.03*1.65"
Applicable models: suitable for all cars
   
Kindly Attention:
OBD2 mode Working voltage: 11~18VDC (12VDC/200mA),when the voltage is higher than 24V, please use a USB cable for GPS mode.
System selection: When HUD is power on, pull up the setting button to select the language and systems. Default system is OBD.
If OBD Data can't shown correctly, please kindly contact us to check OBD compatibility.