Electric underfloor heating floor heating electric tile bathroom set 160W

Warmcoin thin bed heating mats powered by Mi-Heat 

Whether in a new building or an existing property, cold feet are a thing of the past thanks to Warmcoin heating mats. The Warmcoin thin-bed heating mat is characterized by its sensational price-performance ratio and is also easy to install.

The heating mat consists of a shielded twin heating cable (two-wire) that is fixed to a self-adhesive, flexible carrier fabric. The self-adhesive underside of the mat makes fixing it to the floor child's play and thanks to the exact loop spacing of the heating conductor on the carrier material, there is no need for further adjustment.

With the loop spacing of approx. 9cm creates an even heat emission surface, which enables good heat distribution and rapid heating of the floor. These core properties make the Warmcoin heating mats particularly efficient.

Heating mats are laid in the floor leveling compound or tile adhesive and controlled with a thermostat. The system can therefore be used under tiles, marble, carpet*, parquet, laminate or even vinyl* floor coverings. The large area of ​​heat released over the floor surface creates a pleasant level of warmth; the room temperature to be set is lower than with conventional heating systems while maintaining the same feeling of warmth. This makes the Warmcoin heating system efficient and cost-effective.

The heating mats are electrically connected via a so-called “cold end”. In contrast to the single-wire system, the power supply of this two-wire system only comes from one end of the heating mat, which eliminates the need for a second connecting cable and makes installation much easier.

The heating mat comes with two empty pipes/corrugated pipes for free laying of the heating mat connection cable (approx. 1m) and the floor sensor (approx. 2m) of a thermostat included.

*With these floor coverings, the heating mat must be poured into a leveling compound. The top layer of the leveling compound should be at least be 8mm. 

Characteristics:

• Easy construction
• Low installation height
• Less electromagnetic radiation - thanks to twin technology
• Homogeneous heat distribution
• Short heating time
• Maintenance-free and long-lasting

Mounting options:
Directly in the tile adhesive
Self-leveling casting mortar
In mortar
Anhydrite soils

Technical data (heating mat):
Operating voltage: 230V/AC
Max. Power consumption: 160 watts/m²
Max. Operating temperature: 80°C
min. Operating temperature: -10°C
Heating mat width: 50cm
Heating cable diameter: 3.9mm
Installation height of heating mat: 3.9mm
Installation height from the PTC conductor to the heating conductor: 1.1cm
Loop spacing: approx. 9cm
Length of connecting cable: approx. 1.9m
Length of corrugated pipes: approx. 1m for connection cable / approx. 2m for floor sensor
IP protection class: IPX7
Protective measure: FI circuit breaker 30mA

Features (E51 thermostat):

• Illuminated display
• Weekly program
• Soil temperature
• Display can be calibrated / offset

Technical data (E51 thermostat):
Mounting type: flush-mounted
Version: Wired
Operating voltage: 230 volts
Max. Switching capacity: 16A / 3680 watts
Control type: two-point control ON - OFF
Operating temperature: 5-50°C
Sensor: Internal & External, NTC with 2m cable
Temperature control range (internal): 0-55°C (room sensor)
Temperature control range (external): 5-55°C (floor sensor)
Antifreeze: Yes
Floor limitation range: 5-50°C
Display/Lighting: Yes/Yes
IP protection class: IP21
Dimensions: (WxHxD) 80x90x13/43mm

Features (TH213 Wifi Thermostat):

• Mobile phone control via TuyaSmart app
• Optimum start (temperature is reached at the set time)
• Window open detection
• Weekly program 4 switching times (app: Monday to Friday and Saturday, Sunday)
• Compatible with Amazon Alexa, Google Assistant and IFTTT

Technical data (TH213 Wifi thermostat):
Mounting type: flush-mounted
Version: Wired
Operating voltage: 220-240 volts
Max. Switching capacity: 16A / 3680 watts
Operating temperature: +5°C - +30°C
Temperature sensor: Internal & External (NTC 10kOhm)
Temperature control range (internal/room sensor): 5-35°C
Temperature control range (external/floor sensor): 5-45°C
Floor limitation range: 0-30°C
Display/Lighting: Yes/Yes
IP protection class: Class II
Size(WxHxD): 86x86x13mm

Features (M2-WiFi thermostat):

•  Wifi and Bluetooth connection
•  Programmable/operable via app (TuyaSmart)
•  Compatible with Amazon Alexa, Google Assistant and IFTTT
•  Up to 30 timers (switching times) can be programmed via app
•  Weekly program 6 switching times
•  External sensor or room sensor

Technical data (M2-WiFi thermostat):

Mounting type: flush-mounted
Version: Wired
Operating voltage: 230 volts
Max. Switching capacity: 16A / 3680 watts
Operating temperature: 5-50°C
Sensor: Internal & External
Temperature control range (internal / room sensor): 5-45°C
Temperature control range (external / floor sensor): 5-45°C
Antifreeze: Yes
Floor limitation range: 5-60°C
IP protection class: IP20
Display/Lighting: Yes/Yes
Dimensions (WxHxD): 86x86x11.3/43.9mm
Color white

Scope of delivery:
1x Warmcoin heating mat in selected size
2x corrugated pipe
1x user manual
1x Selected thermostat incl. Floor sensor

A notice!

The Warmcoin heating mats must be operated with a temperature controller that is equipped with a temperature limit of +30°C.

The heating conductor of the heating mat must not be shortened or be severed

Purchase Processing

After purchasing, you will automatically be redirected to the eBay checkout page. There you can enter the delivery address and select the desired payment method.

Before placing an order, please make sure that the delivery address you provided is correct.

If you pay with PayPal, the shipping address stored in your PayPal account will be transmitted to us and cannot be changed subsequently

Your infrared-fussboden.de team

Our shipping service providers:

payment

In order to ensure that your purchase is as uncomplicated as possible, we offer you different payment methods.

Pay conveniently with PayPal or bank transfer.

Your bill
All prices include the currently valid VAT, plus. the stated shipping costs.

Your infrared-fussboden.de team

Possible payment methods:

Shipment

Before placing an order, please make sure that the delivery address you provided is correct.
If you pay with PayPal, the shipping address stored in your PayPal account will be sent to us and cannot be changed subsequently (Paypal buyer protection)
If you do not pay with PayPal, the shipping address stored in your eBay account will be sent to us.

Your infrared-fussboden.de team

Our shipping service providers: