Wide Triple External GPU Stand, The stand conforms to standard PCI spacing with the equivalent of 10 slot PCI.

Now with Optional PSU Stand

The stand is designed to hold 3 GPUs with adequate space between card to provide cooling, each PCI slot is 20.32mm wide. so having 2 slot thick cards installed will give a gap of over 40mm between the cards.

If the PSU Bracket Addon is selected then this allows a ATX PSU to be attached to the GPU Stand. An added benefit of this is that it allows the GPU and PSU stand combo to be stood up on its side, saving even more desk space.

The stand come with Front Fan Mounting Points to be able to fit either 2x 120mm fans or 1x 140mm fan (Fans are not included)

The base also has fixing points for three standard PCI-e riser cards to further secure your GPU to the stand. (Screws are supplied for this) (See https://www.ebay.co.uk/itm/274814147688 for guaranteed fit) Stand has been tested with VER009S riser card, the stand should work with other riser varieties but no guarantee is given.

The 120mm or 140mm fans can be attached using the standard screws that come with every new fan.

Card shown in photos is a Gigabyte RTX 3070 gaming OC 8g for reference.
3d render is using 3080 founders editions which are 2 slot cards for reference.

See my store for other GPUs stand setups including dual and single card setups.

Includes

1 X Base
1 x Front
2 x Fan Brackets (For fitting 140mm fan)
25 x Screws for assembly, along with screws to secure a PCI riser card and to secure the Graphics Card.

If PSU Bracket is included also included is;

1 x PSU Front Bracket
1 x PSU Strap
3 x Screws for assembling stand (Does not include PSU Screws)

Note: The following are NOT included GPU, PCI-e Riser, Fan and Screws for mounting the fan.

Assembly

1. Fix the Base and the Stand together using 3 screws on the bottom and 2 on the front.
   Note: if you want to secure the stand by screwing it down it is recommended to do this now.
2. Attach your fans to the front of the stand 120mm fans can be fixed at the 3 points, if using 1 140mm fan fix this at the bottom, as the top fixing can only be installed after the GPUs.
3. Fix your PCI-e risers using Screws Provided. (Stand will still function without the brackets being fixed)
4. Insert your graphics cards into the stand
5. When fixing the GPUs at the top of the stand ensure to attach the Fan brackets as per photos if using a 140mm fan.
6. Screw the top of the fans to your fan brackets.

If you have selected the PSU Bracket Addon;

1. Attach the PSU Front Bracket to the front of the Stand using two screws from the psu bracket in the the front part of the GPU Stand.
2. Attach the PSU strap to the base of the GPU Stand using 1 screw from the Base in to the PSU strop.
3. Proceed with the assembly instructions as above, The PSU can be fitted at any point.

Any questions please do not hesitate to contact, including questions regarding International shipping.