HP 3PAR 3Tier 10GBit SAN 24x 400GB SSD 24x 600GB 15K 24x 2TB BL460c Gen8 v2 2TB

Item Description

*** 3 Year Replacement Warranty on ALL Hardware! ***

HP 3PAR StoreServ 7200c 3 TIER 10GBit SAN With 63.8TB RAW Storage (24x 400GB SSD, 24x 600GB 15K HDD & 24x 2TB 7.2K SAS) - 16x BL460c Gen8 Blade Chassis Configuration.

You have 40.6TB usable capacity! You can see storage breakdown in the images.

HP C7000 G2 Blade System has 16x Gen8 V2 Blades, each with 16-Cores & 128GB RAM.

You are bidding on a very fast, versatile and redundant SAN Storage Solution using HPE best of class products by combining the HPE BL460c Gen8 Blade Servers with the amazing HPE 3PAR 7200c SAN Storage Array.

If you don't know much about HPE 3PAR and why the technology is revolutionary to the SAN Storage and Storage sector as a whole, I've outlined a few major advancements compared with traditional SAN Storage Arrays and RAID technology:

·   HPE 3PAR Storage Arrays cut the spinning hard disk drive and SSD drives into 1GB chunklets automatically as soon as the hard drives are inserted into the array. Physical disks are divided into chunklets. When a physical disk is admitted to the system, it is divided into chunklets that become available to the system. Some chunklets are used by Logical Disks. Other chunklets are designated as spares, to hold relocated data during a disk failure or during maintenance procedures.

·   Each chunklet occupies contiguous space on a physical disk. Space on a physical disk is allocated as follows: All chunklets are 1 GiB; 256 MiB of space is reserved for the table of contents (TOC), which contains the internal description of the system. The TOCs on all physical disks in the system contain the same information; 4 MiB of space is reserved for diagnostic use-2 MiB beginning after the TOC and 2 MiB from the end of the disk logical block address; One or more chunklets are allocated as spares. Any chunklet can be reserved as a spare, but the system setup script selects those chunklets as close to the end of the physical disk's logical block space as possible; The remainder of the disk can be used for Logical Disks.

·   Spare Chunklets Explained - Some chunklets are identified as spares when the system is first set up at installation. Data from other chunklets is moved or reconstructed to these spare chunklets in response to a chunklet or disk failure or when a drive magazine must be serviced. This initial spare storage is equal to the amount of storage in a single drive magazine, using the largest size physical disks.

·   A Logical Disk (LD) is a collection of physical disk chunklets arranged as rows of RAID setsEach RAID set is made up of chunklets from different physical disks. LDs are pooled together in Common Provisioning Groups (CPG), which allocate space to virtual volumes. Creating CPGs maps out the data layout parameters for creating LDs. LDs are created automatically by the system when virtual volumes are created from CPGs. The RAID type, space allocation, growth increments, and other LD parameters can be set when you create a CPG, or can be modified after you create a CPG. For information about CPGs.

One of the most amazing parts of HPE 3PAR Chunklet technology is that you can lose a whole disk shelf to either power failure or disk loss and you still don't lose your data. This is because there is a rule when the Chunklet RAID Sets are created when you setup your CPG. The array will not let more than 2x 1GB Chunklets from the same Chunklet RAID set reside on the same hard drive or disk shelf. This means that using either RAID1, RAID5 or RAID6 for your CPG's, you will be able to tolerate the loss of a full disk shelf without losing your data or having to bring your 3PAR SAN Storage Array offline. 

Another great feature if that you don't have to group disks into RAID sets of the same sized disk anymore. Because 3PAR splits the disk into 1GB chunklets, as long as you have the same speed disk in the same RAID sets, you can group all sorts of sized disks together. For example, you could have a CPG of 146GB, 300GB, 450GB, 600GB, 900GB or 1.2TB 10K RPM and or 15K RPM hard drives with no problem, because they are of the same speed RPM (You can have 10K and 15K RPM drives in the same CPG). It's the same for the 7.2k RPM drives.... You could have a mixture of 1TB, 2TB, 3TB, 4TB, 6TB or 8TB 7.2k RPM disks in the same CPG, again, because they are of the same RPM speed... Sizes doesn't matter because your 3PAR array cuts your disks into 1GB chunklets! It's the same for SSD's! You can mix the same speed SSD's in the same CPG's!

Another amazing part of 3PAR technology is "Peer Persistence" - If you have 2x HPE 3PAR Array in the same data centre or even at separate colocation facilities, you can group them together into a "Peer Persistence Group". This bascally means that you can present 2x SAN Storage Arrays as 1x Storage array to your HOSTS!! Your hosts think there is just one array using 1x WWN number for then SAN, when in fact there is 2x 3PAR SAN Storage Array. One is the Master Array and one is the Standby Array. In the event of a major disaster, like a power outage to the Master Array, the Standby Array will take over instantly, with no affect felt by your hosts! True SAN failover WITHOUT the setup complexities of old technologies like the old HPE EVA Continuous Access. The 3PAR Arrays do not need to be of the same model or age, you could have a HPE 3PAR 7200c and a HPE 3PAR 8400 in the same Peer Persistence Group.

This HPE 3PAR 7200c comes fully licensed with the following features enabled: 

  • 3PAR OS Suite
  • Adaptive Flash Cache
  • Adaptive Optimization
  • Data Encryption
  • Dynamic Optimization
  • Management Plug-In for VMware vCenter
  • Peer Motion
  • Peer Persistence
  • Priority Optimization
  • Recovery Manager for Exchange
  • Recovery Manager for Microsoft Hyper-V
  • Recovery Manager for Oracle
  • Recovery Manager for SQL
  • Recovery Manager for VMware vSphere
  • Remote Copy
  • System Reporter
  • System Tuner
  • Thin Conversion
  • Thin Copy Reclamation
  • Thin Deduplication
  • Thin Persistence
  • VDS Provider for Microsoft Windows
  • Virtual Copy
  • Virtual Domains
  • Virtual Lock
  • VSS Provider for Microsoft Windows

Configuration

1x HP 3PAR StoreServ Dual 10Gbit (24x 400GB SSD, 24x 600GB 15K HDD & 24x 2TB 7.2K SAS) SAN Solution

1x QR482A - HP 3PAR StoreServ 7200 2-node Storage Base
2x QR487A - HP 3Par StoreSer PCIe Dual Port 10GB iSCSI FCoE Network Adapter
3x QR490A - HP 3PAR M6710 2.5 inch 2U SAS Drive Enclosure
24x QR504A - HP 3PAR M6710 400GB 6G SAS SSD Hard Drive
24x K0F23A - HP M6710 600GB 6G SAS 15K rpm SFF (2.5-inch) Hard Drive
24x QR499A - HPE M6720 2TB 6G SAS 7.2K 3.5in Nearline Hard Drive
1x 180-0055-01 - 3PAR RJ45 to DB9 Adapter
1x 72-3383-01 - Cisco Blue DB9 to RJ45 Cable 

4x 692981-001 - HP 3PAR Rack Rail Kit 2U for StoreServ 7000

1x HP C7000 G2 Blade Chassis with the following configuration


1x 507014-B21 - HP C7000 G2 Enclosure 6x PSU 10x Fan 1x KVM Admin Module
4x 455880-B21 - HP Virtual Connect Flex-10 10Gb Ethernet Module
12x 455883-B21 - HP BladeSystem 10Gb SR SFP+
1x 432461-001 - C7000 G2 Rack Rail Kit
6x C14-C13 - Power Cables
1x 409496-001 - HP BLc7000 VGA/USB/Serial I/O Dongle

16x HP BL460c Gen8 2x E5-2650v2 16-core 128GB 2x 146GB 6G SAS HDD P220i/512MB FBWC 2x 10GB DP 560FLB Blade Servers with the following configuration;

1x 641016-B21 HP ProLiant BL460c Gen8 V2 Configure-to-order Server
1x 670031- 001 - HP BL460c Gen8 Processor Heatsink 1
1x  670032-001 - HP BL460c Gen8 Processor Heatsink 2
2x 
SR1A8 Intel Xeon E5-2650v2 8-Core 2.60GHz Processor
16x 713985-B21 - 
HP 16GB (1x16GB) 2RX4 PC3L-12800R (DDR3-1600) Memory Module
2x 655639-B21 - HP Ethernet 10Gb 2P 560FLB Adapter
2x 652605-B21 - HP 146GB 6G SAS 15K SFF (2.5-inch) SC Enterprise
1x 
690164-B21 - HP Smart Array P220i Controller FIO Kit

If you would prefer this configuration with any alterations, feel free to request a quote!

Grab yourself a VERY FAST very cheap full blow SAN/Blade Server solution!

This server comes with an "Intelligent Brokerage Limited 3 Year Any Parts Replacement Next Business Day Warranty"

If anything fails within 3 years, we'll replace the faulty component free of charge on a next business day service using TNT or APC couriers.


SD-SD

Warranty & Support

All hardware purchased is covered with 3 Year Hardware Replacement Warranty - This includes all components installed.
At Intelligent Servers, we're confident that our refurbished servers are as good as new. That's why we offer a free, industry leading 3-year warranty on all products. In the unlikely event your product doesn't work as it should, we'll also offer you a hardware replacement with next-working-day delivery in the UK and 1-3 day delivery for Europe. If you have any issues deploying, configuring, connecting or migrating your hardware into your current infrastructure, our experienced team of IT professionals can offer free remote set up support - we're only a phone call away!

EU VAT

Shipping to the European Union (EU) from the United Kingdom (UK) has changed since the UK left the EU's single market and customs union in January 2021. This means that customs declarations and additional charges may be required for goods being shipped from the UK to the EU. These charges may include VAT, customs duties, and handling fees, and are the responsibility of the buyer. Shipping times may also be affected due to increased border checks and delays. It is important for both buyers and sellers to be aware of these changes and to ensure that all necessary documentation and charges are included when shipping to the EU from the UK. To avoid any potential issues, it is recommended that buyers and sellers consult with their respective customs and shipping authorities before proceeding with any international transactions.
If you are a Business customer, please enter your EORI number in the "Notes To Seller" upon checkout. An EORI number is required for all UK to EU business transactions. If an EORI number is not provided, your parcel is at risk of delivery failure.

Returns

Returns are accepted within 30 days of the delivery date, provided that the item is unused, in its original packaging and in the same condition as when it was shipped.  The buyer is responsible for all return shipping costs, unless the item was received damaged or defective. If the item was damaged during shipping, please contact us immediately to arrange for a replacement or refund. Refunds will be issued within 3-5 business days of receiving the returned item, provided that it meets the above criteria. We reserve the right to refuse any returns that do not meet our criteria or that are returned without a return authorization number.

About Us & Contact

Founded in 2011, IntelligentServers.co.uk is one of Europe's leading refurbished Server, Storage, Networking and Component resellers, specialising in HPE, Dell and Cisco. With over 10 years' of experience refurbishing all aspects of used enterprise IT hardware, you can trust in Intelligent Servers to deliver your IT hardware on time and to a grade A refurbished standard. Our website and ethos has been designed around the IT technician. We understand the strict deadlines and project commitments an IT Manager has to deal with a day to day basis, this is why we've become a very successful competitor within the refurbished enterprise computer hardware industry, and we'll continue to strive to become the best in our game.

If you have any questions at all, don't hesitate to get in touch - Call +44 01423 223430


Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.