Product Name:
 
1 PCS 12VDC RS485 TTL RS232 Serial Port Relay UART Modbus Rtu Switch  PLC PTZ
 
  
 
Package inlcuded:
 
 1 x DC 12V 1Ch RS485 Modbus & AT command  Relay Board
 
 
Application

Automated industry PLC

Smart Home,Home Automation ;

Identification system;

Motor FW & BW;

CCTV Camera PTZ Control; 

Security system;

LED dot matrix screen;
 
 
 
Description: 
 
1: DC 12V power supply
 
2: Standby current (all relays closed) 9MA, 1 relay open 41MA
 
3: ''Open'' ''Close''  ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands
 
4: Two instruction-control mode : AT command and MODBUS command
 
5: Under the AT command ,the maximum delay is 9999 seconds
    Under the MODBUS command ,the maximum delay is 255 seconds
 
6 AT commands can be made serial HyperTerminal (serial assistant) Enter;
   MODBUS commands can be made serial HyperTerminal (serial assistant)  OR ''Modbus Poll'' Enter;
 
7 Under the MODBUS command mode, it can support up to 247 devices in parallel
 
8 Size: 40 * 30 * 18mm ;
 
9 Weight: 18 g; 
 
10 Maximum load: 20A 14VDC;20A/125VAC;10A/250VAC
 
Instruction manual Please ask us after the purchase
 
 
 

  
  
Typical applications:
 
1 AT command mode (M0 Connect), in this mode can be through the serial HyperTerminal (serial assistant) enter a simple AT command control relay. AT command mode time up to 9999 seconds 
 
 

2 MODBUS command mode (M0 disconnect), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control

Wiring Diagram:

 

1 DC 12V control circuit,Wiring diagram below. ''LOAD'' may be camera,LED lights, fans, motors and other DC 12V equipment

 
 
 
 

2 DC 12V motor reversing control, Wiring diagram below. ''LOAD'' can be Fans, motors, pumps and other DC 12V equipment

 
 
 
 
Test Software(We offer a demo video):
  
Serial HyperTerminal:

  Modbus Poll