This is our all new Dual Filter Sock Holder 5 Chamber Sump/Refugium Pro baffle kit for 20 gallon Long Aqueon® glass tanks with adjustable water depth and sealed inlets.

** Tank and Filter Socks Not Included **

Our pro sump/refugium kits are designed specifically to be the highest quality, easiest to install full featured sump kits on the market today. Unlike competing kits, our kits feature a fully assembled and Weld-On bonded primary sock baffle assembly. There is no need to piece together a patchwork of keyed parts to create your sock section. Instead, our single piece solution can be test fit into your tank in seconds, and permanently installed with silicone in a couple minutes. What’s more, the joints between the sock plates and main clear baffle have the same strength and appearance as you’d find in commercial acrylic sumps. No silicone needed to hold those parts together.

Included are all the parts you'll need to convert a standard glass Aqueon® brand 20 gallon long aquarium into a fully functioning 5 chamber sump or refugium for your display aquarium.  All you'll need is the glass aquarium, some aquarium safe silicone and a pair of filter socks that suits your filtration needs. The four included baffle plates can be used to divide the tank into distinct sections for filter socks, two zones for a refugium or equipment like protein skimmers or reactors, a bubble trap and your return pump.

Industry Exclusive Inlet Seals - Our lid support plate features captured O-rings which seal the inlet pipes to prevent salt creep in your system.  This design performs the function of a bulkhead without the need for the large bulkhead flange. This allows us to offer sealed inlets in the same small footprint and at the same cost as our competitors open inlets.  If it turns out you don't like or don't need the seals, they are easily removable to convert the kit back to a traditional open hole design.

Key Features:

• Precision CNC milled from premium grade black and clear 1/4" cast acrylic

• Fully assembled and Weld-On® cemented joints so the kit is ready to silicone in the tank.
• Up to 3 x 1" sealed inlets allow for a complete bean animal setup
 while minimizing salt creep.
  
• Side entry for inlet water allows filter socks to be changed with the pump on.
• Dual filter socks allow for extended time between sock changes
• 2nd baffle provides extra sectioning options

• Adjustable water level baffle to provide a 5.5" - 8" or 6.25" - 10" depth.

• Independent supports for supporting filter foam between the level adjustment baffle and the bubble trap baffle.

• Bubble trap plate to keep bubbles out of your return pump
• Sock baffle height is below the rim of the tank and includes overflow slots and a center recess to allow water to flow into the next chamber without overflowing the tank should your socks become fully clogged.

• 2 x High Flow Sock Silencers
  
• Available in left or right hand orientation
• Optional tubing kit available for easy installation and hookup
  
• Baffle width: 11.8125”

Specifications:

	8” depth	10” depth
Required Glass Tank	20 Gallon Long Aqueon	20 Gallon Long Aqueon
Required Tank Dimensions (L x W x H)	30 1/4” x 12 1/2” x 12 3/4”	30 1/4” x 12 1/2” x 12 3/4”
Materials	Cell Cast Acrylic	Cell Cast Acrylic
Baffle Width	11.812”	11.812”
Number of Chambers	5	5
Sock Size	4”	4”
Sock Holes	2	2
Inlet Size	1” PVC pipe	1” PVC pipe
Number of Inlets	3	3
Running Water Depth	5.5” - 8” adjustable	6.25” - 10” adjustable
Max Flow Rate	900 GPH	900 GPH
Max Display Tank Size	110 gal	110 gal
Adjustment Plate Screws	(2) 1/4 - 20 Black Nylon Thumbscrews	(2) 1/4 - 20 Black Nylon Thumbscrews
O-Ring Material	Silicone	Silicone
O-Ring Size	Dash 125	Dash 125
Bubble Trap Media Supports	2 x 1” wide	2 x 1” wide
Recommended Silicone for Installation	Any Aquarium Safe Silicone or GE Type I	Any Aquarium Safe Silicone or GE Type I
Instructions Included	Yes	Yes
Return Policy	30 Day Free Returns or Exchanges	30 Day Free Returns or Exchanges

Optional Tubing Kit Specifications:

• Pipe length - 10"
• Pipe type - Schedule 200 PVC
• Pipe size - 1"
• Fittings - 1" straight slip/slip connector
• Finishing - Ends sanded smooth and deburred, outlet end features flow enhancing cut hole pattern
  

Installation is simple. Using aquarium safe silicone, silicone the parts into your 20 gallon long glass tank and allow 24 hours to dry.

NOTE: This is designed specifically for Aqueon® 20 gallon long glass aquariums. If your tank is not an Aqueon or you don't know for sure, please contact us prior to ordering with your tank inside dimensions. To measure the inside, use calipers or trim a dowel rod or rigid piece of cardboard until it fits between the front and back glass of the tank while parallel to the bottom. Message us with that length and we can confirm if it will fit.

Custom kits made to your specifications are also available. No project is too big or too small. Please contact us for a quote.

Shipping and Return Policy:

We take quality and professional production seriously which is why we offer quick shipping, with only 1 business day of handling time.  We also offer a 30 day money back guarantee on all the sump kits we produce. We're so confident you'll be satisfied with your purchase we'll even cover the return shipping on US orders if you're not.

** Proudly Made in the USA **