1 piece STE100P 10/100 FAST ETHERNET 3.3V TRANSCEIVER
TQFP64 package

The STE100P, also referred to as STEPHY1, is a high performance Fast Ethernet physical layer interface for 10Base-T and 100Base-TX applications.
It was designed with advanced CMOS technology to provide a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MAC) and a physical media interface for 100Base-TX of IEEE802.3u and 10Base-T of IEEE802.3.
The STEPHY1 supports both half-duplex and fullduplex operation, at 10 and 100 Mbps operation. Its operating mode can be set using auto-negotiation, parallel detection or manual control. It also allows for the support of auto-negotiation functions for speed and duplex detection.

Industry standard

• IEEE802.3u 100Base-TX and IEEE802.3 10Base-T compliant
• Support for IEEE802.3x flow control
• IEEE802.3u Auto-Negotiation support for 10Base-T and 100Base-TX
• MII interface
• Standard CSMA/CD or full duplex operation supported
• Industrial temperature compliant

Physical Layer

• Integrates the whole Physical layer functions of 100Base-TX and 10Base-T
• Provides Full-duplex operation on both 100Mbps and 10Mbps modes
• Provides Auto-negotiation(NWAY) function of full/half duplex operation for both 10 and 100 Mbps
• Provides MLT-3 transceiver with DC restoration for Base-line wander compensation
• Provides transmit wave-shaper, receive filters, and adaptive equalizer
• Provides loop-back modes for diagnostic
• Builds in Stream Cipher Scrambler/ De-scrambler and 4B/5B encoder/decoder
• Supports external transmit transformer with turn ratio 1:1
• Supports external receive transformer with turn ratio 1:1

LED Display
The LED display, consists of five LEDs having the following characteristics:

• 10 Mbps Speed LED: 10Mbps(on) or 100Mbps(off)
• 100 Mbps Speed LED: 100Mbps(on) or 10Mbps(off)
• TX/RX Activity LED: Blinks at 10Hz when receiving, but not colliding
• Link LED: On when a good link is detected, blinks when there is TX or RX activity
• Full Duplex / Collision LED: On during Full Duplex operation. Blinks at 20Hz to indicate a collision

---

NOT PULLED - NOT USED - NOT REFURBISHED - NOT SOLDERED - NOT RE-MARKED - NOT FAKED EXCLUSIVELY NEW OLD STOCK (NOS)

---

---

The devices are from old stock (OEM industrial , mainly from Germany), but they are NEW and UNUSED (NOS devices)
Taken out from the original packaging ( see photo).
What you see on the photo, is what you get .

If you need a higher quantity, please ask for a special offer or give us for the higher quantity your best offer.

Payments

Shipping / Shipping

Economy Int'l Shipping see Ebay

EXPRESS Delivery available, price on request

Combined delivery - If you buy multiple items you pay for the delivery only once.


After buying please wait for our notice to pay.

 

Economy Int'l Shipping see Ebay

EXPRESS Delivery available, price on request

Combined delivery - If you buy multiple items you pay for the delivery only once.


After buying please wait for our notice to pay.

Generale Information / Generale Information

As this offer contains goods in mint condition from industrial OEM stock (so–called NOS) the packing or the goods themselves might visually show it.
The offer is without engagement.
All information given relies on sources by the respective manufacturer, like data sheets etc. This information is supplied witout liability.

---

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.We will try our best to solve any problem.

---

Trademarks: Product names, logos, brands and other trademarks referred to within this offer are the property of their respective trademark holders.

 

As this offer contains goods in mint condition from industrial OEM stock (so–called NOS) the packing or the goods themselves might visually show it.
The offer is without engagement.
All information given relies on sources by the respective manufacturer, like data sheets etc. This information is supplied witout liability.

---

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.We will try our best to solve any problem.

---

Trademarks: Product names, logos, brands and other trademarks referred to within this offer are the property of their respective trademark holders.