RT9（remote）
Input and Output
Output signal: RF(2.4GHz)
Working voltage: 3VDC(AAAx2) not included
Working current :＜5mA
Standby current :＜10μA
Standby time: 1 year
Remote distance: 30m(Barrier-free space)
Environment
Operation temperature: Ta: -30°C ~ +55°C
IP rating: IP20
Weight
Net weight: 0.048kg
Gross weight: 0.088kg
Match Remote Control (two match ways)
(End user can choose the suitable match/delete ways. Two options are offered for selection.)
- Use the controller’s Match key
- Match: Short press match key, immediately press on/off key (RT4 remote) or zone key (RT9 remote) of the remote.The LED indicator fast flash a few times ,means match is successful.
- Delete: Press and hold match key for 5s to delete all match, the LED indicator fast flash a few times, means all matched remotes were deleted.
- Use Power Restart
- Match: Switch off the power, then switch on power again, immediately short press on/off key (RT4 remote)or zone key (RT9 remote) 3 times on the remote. The light blinks 3 times means match is successful.
- Delete: Switch off the power, then switch on power again, immediately short press on/off key (RT4 remote) or zone key (RT9 remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Voltage depends on LED strip,if you use 12V LED strip,please use DC 12V power supply;if you use 24V LED strip,please use DC 24V power supply.
- You can use several remote(No more than 10 remote) to control one receiver.
- One remote can control no more than 50 receivers.
