5 pieces

PIPE INSULATION ARCHES WITH 28MM DIAMETER.

Save money and insulate your hot water pipes.

We offer you the following material for insulation:

Insulation thickness 13 mm

Pre-cut to open.

We have prefabricated the insulation for you so that it results in a 90 ° angle.

Was developed in accordance with EnEV and din 1988 Part 2

Technical specifications:

Inner dimension: 28mm

Insulation thickness: 13mm

External dimension: 54mm


Fire behavior: ( din 4102) B1
Thermal conductivity: ( din 52 613) l = 0.035 W / mK at + 10 ° C mean temperature
l = 0.040 W / mK at + 40 ° C mean temperature
Volume weight: 45 - 80 kg / m3
Operating temperature range: 40 ° C to + 85 ° C
Processing temperature: Process above 5 ° C
Structure-borne sound insulation effect: ( din 52 218) 32 dB (A)
Corrosion Risk: corresponds to din 1988/7

Flexible, round extruded and closed-cell polyethylene foam, resistant to aging and difficult to rot.

The insulation does not contain any PVC.

For copper pipes, steel pipes, multilayer pipes and PPR pipes

Insulate corners without the hassle of cutting!

We deliver the finished 90 ° bend.


The processing is very easy:

After all pipes have been laid and the lines have been checked for leaks, the pipes can be insulated. You don't have to be a professional to do this. Simply coat the straight pipes with the PE-XT (gray insulation material) material. Thanks to the smooth seams, the adhesive can be applied as desired. After the correct position has been found, simply apply the glue and let it dry. It already sticks perfectly. Thanks to our angle solution, the corners can be insulated just as easily as the straight pieces.

We recommend:

Due to press tolerances and small protrusions, systems such as those from Viega, Sudo, Mapress, C-Press and others may have to choose larger diameters. Please measure the thickest point on the angle. As a rule, the insulation is bought one size larger. For example: You have pipes with a diameter of 15mm, then choose an angle with a diameter of 18mm for the bends. Pipes in particular are not affected by this rule. There you can also choose 15mm insulation for a 15mm pipe.

Please do not complete your purchase until you have all the parts for the insulation from packed into the shopping cart to have. We only charge shipping once and you save money.

After all pipes have been laid and the lines have been checked for leaks, the pipes can be insulated. You don't have to be a professional to do this. Simply coat the straight pipes with the PE-XT (gray insulation material) material. Thanks to the smooth seams, the adhesive can be applied as desired. After the correct position has been found, simply apply the glue and let it dry. It already sticks perfectly. Thanks to our angle solution, the corners can be insulated just as easily as the straight pieces. Due to press tolerances and small protrusions, systems such as those from Viega, Sudo, Mapress, C-Press and others may have to choose larger diameters. Please measure the thickest point on the angle. As a rule, the insulation is bought one size larger. For example: You have pipes with a dia