Listing is for 1 BRAND NEW Scott Aerator Floating Pond & Lake Surface Water Mover / Agitator / Circulator / Muck Blaster / Aquasweep in 1/2HP with a 50' Cord ** Longer lengths available.


Keep your waterfront, dock area, and canals conveniently free of floating algae and debris. The Scott Aquasweep floating model is made to push unsightly trash and organic debris to where it can be easily picked up and taken away. The Aquasweep floating model is fully adjustable for various directional flows, and its stainless steel, high-density polyurethane construction is durable and long-lasting, even in salt water!

The design of the Aquasweep floating model allows adjustments for tidal changes and for water levels due to weather conditions.

NOTE: The Floating Aquasweep does not adjust down to the bottom to move muck. It's designed to create a strong surface current. The Dock Mount Aquasweep is designed for bottom maintenance.

Like all products manufactured by Scott Aerator, the Aquasweep carries an unconditional, 5-year motor warranty and utilizes an environmentally friendly oil-free motor.

Motor specs: 60 Hz, single-phase, 10 amps, 680 watts. 230-volt model available - runs $100 more.

GFCI required. Please disconnect power source when swimmers are present.

Proudly made in the USA.

All of our fountains, aerators, de-icers, muck-movers and sub-surface aerators are oil-free and require almost no maintenance.

Standard Features

• American made components for all-weather performance

• Moves 400 gallons per minute

• Oil free motor Motor: 115 Volt 60 HZ, single phase, 10 amps, 670 watts, 3,450 rpms

• 12 gauge submersible power cord, 35 feet included, capped by a rugged Hubbell marine style plug

This Kit Includes:
1 - Aquasweep 8" Housing/Bracket
1 - Stainless Steel Debris Shield
1 - Float Platform
2 - 3" Eyebolts/Washers/Locks Nuts
3 - Small Self Tapping Screws
2 - 3/8" x 50' braided nylon rope
Tools Needed
One 3/8” Wrench or Socket Screwdriver
Two 1/2” Wrenches (Or Pliers)

Common Solutions

Maintenance, Winterizing, Storing
Our products require very little to no maintenance. Under normal operating conditions, you should enjoy many years of trouble-free service from the unit. As a rule of thumb, the propeller assembly on our AquaSweep should be changed every three years. This is a simple procedure that can be done on-site. When the unit is removed from the water for the propeller switch, it would be a good opportunity to wash the unit down with high pressure water. Once the unit is clean, a visual inspection of the entire AquaSweep is recommended to be certain nothing is restricting water flow.
The AquaSweep has been engineered to be operated all year or unplugged and left installed throughout the winter. If the AquaSweep is ever removed from the lake or pond, it is essential to store with pump submerged in a 5 gallon bucket of water to avoid damage to the pump seals.

The Scott Aerator Awesome Warranty
All standard Scott Aerator products are unconditionally warranted for five years against
motor defects in materials or workmanship, under normal operating conditions. All other
product components are warranted for one year from date of purchase. Scott Aerator will
repair or replace failed parts under warranty when the defective unit is returned to the
factory, shipping prepaid, and factory inspection establishes that the part was defective.
The unit must be returned to the factory prior to shipment of replacement parts. All parts
replaced under this warranty will be returned with shipping prepaid. Scott Aerator will not
be liable for consequential damage nor for any costs associated with removal or attempts
to repair components in the field.