DC 24V Brushless Motor Hall Motor Drive Board Adjustable Speed Controller Module
1. Before application, first confirm whether your motor's working voltage, current, and speed are consistent with the control board
2. Be sure to confirm whether the polarity of the power supply is correct before turning on the power, and whether there is a short circuit in the connected wires, etc.
3. From start to running of the motor, if the heat is serious, the current exceeds the normal value, and the speed does not go up, you need to stop the acceleration immediately and disconnect the power supply
1. The motor cannot start normally: please check whether the power supply is normal, whether the related wiring of the motor is correct, whether the speed regulation voltage is normal, and whether the enable terminal is high (the enable terminal should be 5V in normal use, and 0V when disabled)
2. The Hall phase sequence does not match the motor winding, adjust the three Hall wires until the motor runs smoothly
Connect the motor winding wires (3 pieces) and the power wire according to the signs on the drive board (see picture)
2. Connect the Hall line:
According to the hall line mark on the motor, connect it to the hall connection terminal on JYQD_V7.0 (see picture)
3. Connect to the control terminal:
From speed control, forward and reverse rotation, enable, connect the speed control potentiometer, forward and reverse switch, and enable switch as shown in the figure (see figure)
4. After the first 1/2/3 three-step operation, you can power-on test (run). Before power-on, you must pay attention that the power supply voltage is consistent. The motor should start from a stopped state and be able to run in a balanced manner
6.SC enable terminal:
When not using this function, it can be connected to 5V or left floating
Working voltage: 24V
Working current: <3A
Enable function: Yes
Speed control function: Yes
Power indicator: green light
Running indicator: red light
Overcurrent protection: Yes
1X 24V DC brushless Hall motor motor drive board adjustable speed and reversible control module hardware without program
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
-We ship items to Worldwide. Thank you!
-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
* Please include your eBay ID and item number with any email requests.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Am 14.10.21 hat der Verkäufer die folgenden Angaben hinzugefügt: