We are a stocking Flexcharge dealer listed on SES Flexcharge's dealer page.

The following is copyrighted by SES Flexcharge:

The Flexcharge™ Real Time Programmable Timer is a 24 hr, 8 event ON 8 event OFF, clock based programmable 8A load controller.  Multiple Load ON and OFF times are programmed into this real time clock controller.  Each day can be programmed with its own unique timing pattern.  Eight  ON and eight OFF events can be programmed independently.  

Example;  Use one ON event to  have a light come on at 7pm every day then use seven different OFF events to turn the light OFF at a different time each day. 

This controller may be used in conjunction with the Flexcharge NCxxLxx or Night Watchman to have the load come ON at dusk, then shut OFF at a pre-programmed time or turn back on before morning and then OFF at dawn. 

• Internal battery maintains clock and programmed memory for up to 3 years with no external power. The battery will not operate the timer.
• Consumes less than 5mA in standby mode.  
• Drives up to 8A Inductive Loads (motors or lights with ballasts) or 16A Resistive Loads.  
• Isolated relay contacts allow user to directly control up to 240Vac Loads  
• Reverse Polarity Protected.  
• Manual override allows the user to manually turn the load ON and OFF as desired.  
• Easy to Use Terminal Block for simple installation. 
• Easy programming of timer functions. 

The clock circuit of the timer must have 12 volts to operate it but the timer will switch any voltage up to 240AC volts.  Because the clock only draws 5mA in standby and 45mA when the load is on, you can operate the timer from a 12 volt battery of the system but then switch any higher higher voltage.  This works well on 24 volt DC systems.  

Contact us for additional alternative methods of operating the timer on higher voltages.

The timer is not waterproof so it must be mounted in a protected area.

We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page:

http://www.flexcharge.com/Where-to-buy.html

The following is copyrighted by SES Flexcharge.

The Flexcharge™ Real Time Programmable Timer is a 24 hr, 8 event ON 8 event OFF, clock based programmable 8A load controller.  Multiple Load ON and OFF times are programmed into this real time clock controller.  Each day can be programmed with its own unique timing pattern.  Eight  ON and eight OFF events can be programmed independently.  Example;  Use one ON event to  have a light come on at 7pm every day then use seven different OFF events to turn the light OFF at a different time each day.  This controller may be used in conjunction with the Flexcharge NCxxLxx or Night Watchman to have the load come ON at dusk, then shut OFF at a pre-programmed time or turn back on before morning and then OFF at dawn. 

• Internal battery maintains clock and programmed memory for up to 3 years with no external power. The battery will not operate the timer.
• Consumes less than 5mA in standby mode.  
• Drives up to 8A Inductive Loads (motors or lights with ballasts) or 16A Resistive Loads.  
• Isolated relay contacts allow user to directly control up to 240Vac Loads  
• Reverse Polarity Protected.  
• Manual override allows the user to manually turn the load ON and OFF as desired.  
• Easy to Use Terminal Block for simple installation. 
• Easy programming of timer functions. 

The clock circuit of the timer must have 12 volts to operate it but the timer will switch any voltage up to 240AC volts.  Because the clock only draws 5mA in standby and 45mA when the load is on, you can operate the timer from a 12 volt battery of the system but then switch any higher higher voltage.  This works well on 24 volt DC systems.  Contact us for additional alternative methods of operating the timer on higher voltages.

The timer is not waterproof so it must be mounted in a protected area

See our other items