PIPE INSULATION BEND WITH 42MM DIAMETER.

Save money and insulate your hot water pipes.

We offer you the following material for insulation:

PE-XT self-adhesive

With self-adhesive closure on both sides
High adhesive strength
Was developed according to EnEV and din 1988 Part 2

Technical specifications:

Inside dimension: 42mm

Insulation thickness: 13mm

External dimensions: 68mm


Fire behavior: ( din 4102) B1
thermal conductivity: ( din 52 613) l = 0.035 W/mK at +10°C mean temperature
l = 0.040 W/mK at +40°C mean temperature
Density: 45 - 80kg/m3
Temperature application range: 40°C to + 85°C
Processing temperature: Process above 5°C
Structure-borne noise insulation effect: ( din 52 218) 32 dB(A)
Risk of corrosion: corresponds to din 1988/7

Flexible round extruded and closed-pore polyethylene foam, resistant to aging and difficult to decompose

The insulation does not contain any PVC components

For copper pipe, steel pipe, multi-layer pipe and PPR pipe

Insulate corners without annoying cutting! We deliver the finished 90 ° bend.

Simply attach the insulation, peel off the adhesive strips, press together and you're done!

Processing is very easy:

After all the pipes have been laid and the lines have been checked for leaks, the pipes can be insulated. You don't have to be a professional to do this. You simply coat the straight pipes with the PE-XT (grey insulating material) material. Thanks to the self-adhesive seams, there is no need to apply adhesive. After finding the right position, simply peel off the protective film and place both edges on top of each other. It sticks perfectly. Thanks to our angular solution, the corners are just as easy to insulate as the straight pieces. Simply put it on, check the fit, peel off the film, press and the angle is in place.

We recommend:

Due to press tolerances and small overhangs, systems such as those from Viega, Sudo, Mapress, C-Press and others may require larger diameters. Please measure the thickest point on the bracket. As a rule, the insulation is bought one size larger. For example: you have pipes with a diameter of 15mm, then choose an elbow with a diameter of 18mm for the bends. Straight pipes are not affected by this rule. There you can also choose 15mm insulation for a 15mm pipe.

Please do not complete your purchase until you have bought all the parts for the insulation from us. We only charge shipping once and you save money. If, due to the system, we charge you twice for shipping, we will of course reimburse you for the overpaid fees. We use PayPal for this.

After all the pipes have been laid and the lines have been checked for leaks, the pipes can be insulated. You don't have to be a professional to do this. You simply coat the straight pipes with the PE-XT (grey insulating material) material. Thanks to the self-adhesive seams, there is no need to apply adhesive. After finding the right position, simply peel off the protective film and place both edges on top of each other. It sticks perfectly. Thanks to our angular solution, the corners are just as easy to insulate as the straight pieces. Simply put it on, check the fit, peel off the film, press and the angle is in place. Due to press tolerances and small overhangs, systems such as those from Viega, Sudo, Mapress, C-Press and others may require larger diameters. Please measure the thickest p