D_PF FAP Simulator

Vehicles:

Toyota: Auris 2.0 D-4D, Auris 2.2 D-CAT

Avensis 2.0 D-CAT, Avensis 2.0 D-4D, Avensis 2.2 D-CAT, Avensis 2.2 D-4D, Avensis Verso/Picnic D-4D

Corolla 2.0 D-4D, Corolla Verso 2.0 D-4D, Corolla Verso 2.2 D-4D, Corolla Verso 2.2 D-CAT

Land Cruiser 3.0 D-4D, Land Cruiser 4.5 D-4D

Previa 2.0 D-4D

RAV4 2.0 D-4D, RAV4 2.2 D-4D, RAV4 2.2 D-CAT

& Etc. models

Lexus - Models With DENSO ECU 2.0 2.2 D4D, D-CAT 

About device:

This DPF Emulator is intended for use in diesel engine equipped cars which is equipped with Diesel Particulate Filter (DPF)

During operation DPF filters get clogged and it causes engine power loss and increase of fuel consumption

This is caused by the resistance in exhaust gases

From time to time DPF needs to be regenerated. It is done by injecting extra amount of fuel in to the engine to increase the temperature in the exhaust pipe

During this phase soot in the DPF filter is burnt and the filter is cleaned

Unfortunately this process is not efficient enough and after some time regeneration becomes ineffective, because debris which can't be burnt by the regeneration is built up

Time that takes filter to get permanently clogged depends on the engine type, driving style, fuel contamination, engine oil, air filter quality, etc.

After DPF filter is permanently clogged it will have to be replaced. This is a very expensive part. DPF filter can also be removed. But simply removing DPF filter is not enough

Car‘s Engine Control Unit is measuring different parameters of the DPF filter and if you simply remove the DPF filter, ECU will generate an error

and will switch to the service mode which will drastically reduce engine power and illuminate warning light in your dash board 

To avoid that, DPF Emulator needs to be installed in to the car to trick the ECU in thinking that DPF is functioning normally

This DPF emulator is built to fit most of the modern diesel cars (see list of the associated vehicles below)

After DPF emulator installation - no more DPF problems occur, fuel consumption decreases, no white smoke, no DPF warning light, no more regeneration is needed

Quality:

All of our DPF emulators have passed strict quality control testing

PCB is manufactured using automated SMT line without human interference to avoid human errors

This helps us to eliminate the risk of shipping a faulty device

Shipping:

Standard shipping with tracking (from 3 to 5 working days OR next day delivery)

Package includes:

1x DPF emulator (DPF Emulator NOT Plug&Play need extra skills for installation)

1x DPF emulator wiring scheme

1x Off-road use

Please find detailed info in the photo description

Thanks for your attention