〖DE〗3Sets 8Nm NEMA34 Closed loop Servosteuerung Driver CNC Servomotor 8N.m HSS86

 for CNC Router Engraving Milling Machine



We will Ship from Germany warehouse to Below Europe Countries

AustriaBelgiumBulgaria

Czech Republic

Croatia

DenmarkEstonia
FinlandFranceGermanyGreeceHungaryIrelandItaly
LatviaLithuaniaLuxembourgNetherlandsPolandPortugalRomania
SlovakiaSloveniaSpainSwedenUKMalta 


Package include:
  • 3 x 86HSE118 8N.m Nema34 Closed Loop Servo Motor 118mm 6A
  • 3 x HSS86 Closed loop Servo Driver AC24~70V or DC30-100V 8A
  • 3 x 3m Extension cord
  • User manual


                                           100% Brand New and High Quality!!!


Nema34 8N.m Closed Loop Servo Stepper Motor & 2HSS86 Servo Driver CNC Kit

3


s

Specifications

  • Size:86x86x118mm
  • Current :6.0A
  • Phase:2
  • Step Angle(degrees):1.8 degree
  • Lead wire:4pcs
  • Holding Torque:8N.m
  • Resistance:0.44±10%Ω
  • Inductance:3.7±20%mH
  • Insulation resistance:100MOhm(500V DC)
  • Insulation Class:B

D
2

Overview

  • This is the nema 34 series hybrid stepper servo kit. The 2HSS86 driver adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.
  • The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system,besides that,it also have some function of AC servo motors.

2HSS86 Driver

3

4

s

  • Voltage range: AC24-70V or DC30-100V
  • Peak current :Peak 8.0A
  • Logic input current:7-20mA
  • Frequency:0-200KHz
  • Suitable motor: 86HSE156, 86HSE118, 86HSE82
  • Encoder lines:1000
  • Insulation resistance:>=500MΩ
  • Operating temprature:0~50℃
  • Operating humidit:40~90%RH
  • Virbration:5.9m/s2Max

1.2.1 Stepper motor closed loop system, never lose step.

1.2.2 Improve motor output torque and working speed.

1.2.3 Automatic current adjustment based on load

1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.

1.2.5 Drive nema 34 series closed loop stepper motor.

1.2.6 Pulses response frequency can reach 200KHZ

1.2.7 16 kinds microsteps choice, highest 51200microsteps/rev.

  • Over-current,over-voltage and position ultra difference protection function.
  • Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on

Wiring diagram

s





Feedback:
We maintain hightest buyer ratings
> Positive Feedback will be much appreciated from you.
> Any dissatisfaction,please contact us immediately!
> Please do not leave neutral or negative feedback before we help you out.

Returns:
> Defect: We will fully refund or send you a new replacement,please contact and return within 30 days.
> Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods.
> Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued.

Contact us:
> If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.