HPS 3/8" (9.5mm) 3-ply High Temperature Reinforced Silicone Cap (Black)


HPS 3/8

Item Description

The HPS Performance 3/8" high temperature reinforced Black silicone cap is designed specifically to be installed on your cooling system. Vacuum caps have no reinforcement and are intended for vacuum and very little pressure. The HPS Reinforced Silicone Caps are manufactured just like our reinforced silicone radiator hoses. With 3 layers of polyester webbing for reinforcement, you can be sure that HPS Reinforced Silicone Caps will withstand the high temperatures and pressures of your cooling system for years to come. HPS Reinforced Silicone Caps are compatible for use with coolant, water, air, turbocharger bypass valve ports, vacuum ports, throttle body water ports, heater cores, and much more. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 3-ply Polyester. Inside Diameter: 3/8" (9.5mm). Color: Black. Wall Thickness: 4mm. Inside Length: 1-3/16". Overall Length: 1-1/2". UV and ozone resistant. Remark: HPS reinforced silicone caps are not compatible with fuel, oil, or any petroleum-based products.

Item Specification

FAQ

Buy more and save shipping!!

Straight Reducer, Coupler Hump Coupler Offset Reducer, Coupler Charge Air Cooler (CAC) Hose
180 Degree Elbow 90 Degree Elbow
(Coupler, Reducer)
45 Degree Elbow
(Coupler, Reducer)
Straight Tube
(1 Foot, 3 Feet)
Heater Hose Silicone Vacuum Hose Worm Gear Clamps T-Bolt Clamps
Aramid Hump Coupler T Shape Hose

Shipping

Payment

Return

Customer Support

Disclaimer

All products that Mo City Inc is selling are designated as RACING, OFF-ROAD, OR SHOW USE ONLY and are not intended to be used on the highway or any pollution controlled vehicles UNLESS OTHERWISE STATED BY MANUFACTURERS. This does not mean they cannot function on such vehicles, but merely that they may not uphold to the regulations and restrictions of a highway vehicle and therefore must be designated as OFF-ROAD USE ONLY. For OBD-II vehicles, the use of any manifolds or test pipes may remove a Catalytic Converter, in doing so this will trigger a Check Engine Light due to Catalytic Converter failure; this sometimes can cause the vehicle to enter into a "Null Mode" which can alter the vehicles performance in a negative fashion. Mo City Inc is NOT RESPONSIBLE FOR ANY PENALTIES OR FINES ASSOCIATED WITH THE USE OF ANY OF THE PRODUCTS THAT WE SELL. Please check and confirm with all local laws before purchase to ensure that you understand fully the consequences and risks associated with the use of the products sold by Mo City Inc. Mo City Inc is not responsible for any labor costs with installing or removal of any products regardless of the situation that has occurred and will not be held liable for such costs. If a manufacturer states that its product is approved for highway use then the manufacturer of said product will be responsible for its own claims and is in no way associated with Mo City Inc.

Powered by SixBit
Powered by SixBit's eCommerce Solution