boostprojects-header2

Wilwood Caliper Powerlite Radial Mount 1.00" Pistons 0.350" / 0.500" Disc

Description

BRAND NEW IN BOX


DESCRIPTION

The Powerlite four piston radial mount caliper starts at 2.26 pounds with a sleek profile, superior strength, lightweight and durable in higher temperature situations. Easily adapted to a wide range of sports, rally, and off road driving applications.

Strength comes from a combination of process and design. The process of stress-flow forging re-aligns the metal's grain structure within the contour of the caliper body. This eliminates the stresses and interruptions to the internal grain structure that occur when machining a straight block billet. The FEA generated radial transition design eliminates steps and shoulders in the area between the piston housing body and the caliper bridges. Incorporating a radius in this critical area substantially increases resistance to deflection and caliper separation under load.

The Powerlite uses a new 7912 type brake pad that is supported from the top by Quick-clip pad retainers. This eliminates the need for a pad support step in the bottom of the caliper and adds additional clearance for mounting closer to the hub on small wheel and rotor applications. The pad radius matches to rotor diameters between 9.45" (240,0 mm) and 11.75" (298,5 mm), and the caliper fits easily inside many 13.00" (330,2) wheel applications. The Quick-Clips also accommodate easy pad access without caliper removal. Brake pad compounds are available for the full range of sport and competition applications.


PRODUCT INFORMATION

Pistons
Piston Count: 4
Piston Area (in²): 1.58
Piston Type: Stainless
Dust Boot: No

Rotor Dimensions
Rotor Width (in): 0.50
Rotor Diameter(in): 11.00

Pad Dimensions
Pad Area (in²): 5
Pad Volume (in³): 1.8

Duty Rating & Material
Material: Aluminum

Colors & Finish
Color: Ano
Finish: Type III Ano

Mounting
Mount Center(in): 5.08
Mount Side: Universal
Mount Type: Radial

Rotor Compatibility
Rotor Width (in): 0.50
Maximum Rotor Width (in): 0.50
Minimum Rotor Width (in): 0.35
Maximum Rotor Diameter(in): 11.00
Minimum Rotor Diameter(in): 9.45

Brake Pad Specifications
Brake Pad Type 1: 7912
Brake Pad Type 2: N-A
Brake Pad Type 3: N-A
Total Pad Area (in²): 5
Total Pad Volume (in³): 1.8

Piston Specifications
Piston 1 Bore (in): 1.00
Piston 2 Bore (in): 1.00
Total Piston Area (in²): 1.58

Mounting Specifications
Mount Type: Radial
Mount Side: Universal
Mount Center(in): 5.08
Mount Hole Size(in): 0.40
Mount Height(in): 1.56
Inlet Thread Size: 1/8-27 NPT

Additional Notes
Every caliper is equipped with Wilwood's SRS stainless steel bridge plates. The SRS plates eliminate the bridge wear caused by pad gouging. The spring-loading action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to squeal under braking. Internal fluid passages eliminate the need for external tubes. Four corner bleed screws assure simple and effective air evacuation and allow one caliper to be mounted in of four positions.

Bracket kits are used to install the calipers in place of most lug mount calipers. Radial mounting simplifies service and the bracket kits provide two planes of adjustment for precise alignment over the disc. Bracket kits include the radial mount bracket, studs, locknuts, and caliper alignment shims.
 

Ask us about saving money with our PACKAGE DEALS
CP Cometic ACL Ferrea and ARP KitsCustom Made Package Deals
AEM Package DealsPackage Deals
Ask us about combining purchases for package deal auctions
  • Pistons
  • Rods
  • Bearings
  • Head and Main Studs
  • and more...

Shipping

  • We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
  • We also offer expedited shipping at an extra cost.
  • International shipping rate applies to addresses in all other locations
  • Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
  • Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
  • There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
  • We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
  • Ebay Promotional Shipping is good for shipments going to 48 lower states only.
  • We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
  • Shipping charges are non-refundable.
  • We will gladly combine shipping charges to one charged based on the total weight of the package.   FAH

Payment & Return

  • We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted. 
  • Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.
  • International Buyers, please contact us before bidding to discuss the shipping cost.
  • We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.

If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.