eBay

********* IN STOCK @ Middlesex *********

"Registered Local Business"

That Aussie bloke is now supplying his North American fellow workers and trading through his US warehouse: )

Designed/made by the qualified carpenter and for the real tradesman,

we are not like those profit driven people who don't look after our fellow workers,

it either solves the problem, or goes into the rubbish bin.

1x Custom Made DeWalt 20v portable soldering station with soldering iron and OLED display, rated 60w, perfect for electronic applications. It's based on the powerful and well reviewed T12 console with comprehensive options to setup your own style of standby (duration/activate method), sleep, temp boost, battery low voltage protection etc. So whether you are really serious about soldering or just after a quick plug and work, it covers all sorts of needs, but now without the cord.

Comes as a bundle set with 4 tips in total, whether your job needs rough and quick soldering or with fine and hard to reach tasks, those tips take care of it!

It's sold without the batteries, I also have models for other brands available, please check my other listings.

The tip included are BL (conical shaped point tip) J02 (thin bent conical shaped), d24 (chiesel type tip with a flat head), and KU (knife tip, top section was about 3-4mm).

Some quick facts for your information:

it's powerful enough to get tin melt in 8 seconds
it has PID temperature control, and allows you to calibrate it
it allows you to set and save default temperatures based on different tips
it allows you to set up sleep/wakeup activation mode
it allows you to set up standby/sleep temperature
it has low voltage alarm/cutoff setting to protect your battery
and for sure, it allows you to setup temperature as you go
about runtime, with my style of use, a fully charged 5ah battery will last me 4-4.5 hours until it reached the cutoff voltage of 15.8V

The full menu options are as below, but remember you don't necessarily need to touch every option if you don't use it. You could just plug in, set up temperatures, and also the low voltage protection (I recommend go 15.8v which roughly indicates 85% of the battery capacity), than start to work, and adjusting the temperature as you go!

Handy information before you work:

Tin melting point is 183°C, lead-free tin melting point is 227°C, regular welding temperature is 300-380°C depending on what you are working with, but continuous run above 380 degree will significantly damage the tip so you should avoid it unless you really need to. The tips are consumables anyways.

What temperature to use? (These are just indications, it also depends on the type of tip in use.)

- 260 for SMD

- 300 for PCB electronics

- 340 for components with thicker leads

- 380 for heavier work with more mass or heat conduction

Menu:

(some items have sub menu, and I will attach a user manual with the order for your reference. But with KSGER T12 being a mature and prevalent solution, there are numerous youtube resources that can walk you through the menu if you like to dig further)

base setup
standby setup
sleep setup
boost setup
stepping temp
screen setup
buzzer setup
factory reset
power monitor
boot screen test

What's included in the Package:

1x 18v soldering station console

1x handle

1x t12 BL tip

1x t12 j02 tip

1x t12 d24 tip

1x t12 ku tip

1x coil style handle rest

1x User manual

and Countless of upcoming projects and joy of yours : )

Below are some information from the original KSGER t12 console for your reference, and this portable version performs the same.

KSGER T12 STM32 V3.1S Welding Soldering Iron Station OLED DIY Plastic Handle Electric Tools Quick Heating T12 Iron Tips 8s Tins 907 9501 Handle with 3Pcs T12 Tips

PLEASE READ: Disclaimer/Disclosure Statement -The adapter only works on 18v batteries -batteries are potentially hazardous and can present a serious fire hazard if improperly used. Remove battery from adapter when not in use. -never fully discharge your batteries. -We are not associated or affiliated with Makita.-this adapter should only be installed by a qualified technician -The product is not intended for use by persons (including children) lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product -Store the adapter when plugged-in to battery away from other metal objects like keys, nails, screws or other small metal objects. These things can make a connection from one terminal to the other, shorting the battery terminals together and causing burns or fire -Use at own risk, we do not accept responsibility for any injuries, loss or damage to any person or equipment whatsoever when using this adapter. -To keep your batteries protected never run them completely dead as they will wear the capacity down over repeated cycles and always keep lithium-ion batteries fully charged when not in use for long periods. Under no circumstances shall we be liable for any indirect, incidental, consequential, special, exemplary, or punitive damages arising from or related to the adapter, whether such claim is based on warranty, contract, or otherwise. -This adapter has no copied parts of Makita products and has been independently engineered.