DE丨CNC Frässpindel Kit 2.2KW Air Spindle Motor ER20+HY VFD Inverter+Clamp+Collet

for CNC Router Milling Engraving Machine

We will Ship from Germany warehouse to Below Europe Countries

AustriaBelgiumBulgaria

Czech Republic

Croatia

DenmarkEstonia
FinlandFranceGermanyGreeceHungaryIrelandItaly
LatviaLithuaniaLuxembourgNetherlandsPolandPortugalRomania
SlovakiaSloveniaSpainSwedenUKMalta 



Package included:





100% Brand New&High Quality!!!


 

1. 2.2kw Air-cooled spindle motor engraving milling grind 80x213mm

1.  2.2KW ER20 Air-cooled Spindle motor Engraving milling Grind

Specification:

Material:Stainless Steel

Size:Φ80mm

Power:2.2Kw

Voltage:220VAC

Current:8A

Frequency:0-400Hz

Speed:10-24000rpm

Cooling:Air-cooled

Runout off:≤0.01mm

Precision tapered bore:≤0.005mm

Bearing Lubrication:Grease

Collet size:ER20

Bearings:4PC UTE bearing (steel ball beandings, 1 pair of 7005+1 pair of 7002)

Net Weight:4.4kg

Power supply interface:Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 ground wire this interface must be safe ground.

Main application:Wood, Aluminum, Stone, metal, glass, PVC industry

 

spindle 1.5kw

high speed spindle motor

cnc router spindle

Air-Cooling Method

Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.

Stainless Steel Materials

The spindle has fine workmanship, stainless steel body and dustproof design make the spindle more durable.

Using optimized 7 series P4 grade 7002 and 7005 bearings, this series of bearings has strong hardness and rust resistance, high precision, the radial runout of the spindle is less than 0.01mm, the precision taper hole does not exceed 0.005mm, high precision and durable.

Rotation Accuracy

The motor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.



2.  Variable Frequency Drive VFD Inverter 2.2KW 3HP 220VAC

2.2KW vfd

Feature

  • PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
  • Easy PLC function can realize 16 legs of speed and inverter control function;
  • With extremely strong anti-jamming capability
  • Low output ratting torque0.5HZ-150%, low speed running ability;
  • Carrier adjustable by 16KHZ, completely soundless working environment;
  • Broad voltage working area, normal running in 220-240V;
  • Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
  • Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
  • With perfect error protection and short circuit starting protection capability;

motor spindle huanyang

cnc spindle motor kit

220v water cooled spindle

LED Display

  • 1: Led display zone, indicating: POWER, FOR, REV, Frequency, Current, Revolution, etc.
  • 2: Main diaplay zone, indicating: Frequency, Current, AC V, DC V, Revolution, Counter temperature, etc.
  • RUN: Run key
  • Stop: Stop / Reset key
  • JOG: FOR / REV switch
  • PRGM: Fuction key
  • SHIFT: ( DISP ) Shift key
  • SET: Set key ( Enter )
  • UP / Down: Power value change key

Wiring

  • Notice: If your motor's speed is not 24000rpm, please first restore the factory settings and change PD013 to 8, then you can set other parameters, after that can you connect the VFD to 3 phase motor.
  • Wiring:

  1. VFD's U= Spindle's U1
  2. VFD's V= Spindle's V1
  3. VFD's W= Spindle's W1
  4. Connect any 2pin terminal "R", "S" or "T" of the inverter to "220VAC".

Multi-Protection Functions

  • Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection.
  • And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.

2.2变.5

This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.

 

Technical Paramer

1.Inpute voltage:220V±15%

2.Output voltage:220VAC±15%

3.Input Frequency:48-63HZ

4.Outpute Frequency:0-400HZ

5.Inpute phase:1 phase 

6.Outpute phase:3phase

7.warranty:3 year


Basic Connection Diagram

0.1

 

 


0.1


 

CE





4. ER20 Spring Collet


(14pcs,1mm-13mm)

(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm,8mm,9mm,10mm,11mm,12mm,13mm)


Product Description


Out dia (D1):11.5mm

Height (H):18mm

Hole dia (D2):1-13mm

Run-out tolerance 0.015mm
First class 1065 carbon steel
Hardened & precision ground

 

ER20夹头1套



Shipping:
All items will be sent out with tracking within 1-2 business day after the payment received,may be a delay on weekends;

Return&Refund:                                                                     
1.Any reason required for all refund.Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,we will help you to solve any problems.