Made for Maserati / Aston Martin / Toyota / Lexus / Skyline hubs

114.3 PCD

Box fresh refurbishment, only been on the car a few weeks and barely driven. Now the DB9 is up for sale so I’ve put the originals back on as the purists complain if you alter an Aston!!

The centre bores are slightly larger than the Aston at 75mm and unfortunately I don’t know the off set but they sit perfectly to really flush fill the arches.

There is a slight weld, not structural though. It was preventative… due to there being a v shaped groove in the lip of the rim which itself could have become a split. I decided to have this ground and welded but it didn’t go far, only about 5mm. The weld is only 12mm and does not protrude into the rim itself, just the lip

The tyres are good, rears are 275 35 20 and both have good tread, at least 4.5mm on one and 6mm on the other

The fronts are ageing a bit, from 2013 but both have good tread although one is wearing a bit on the inner edge.

All tyres are expensive PIRELLI P ZERO’s

The centre caps need to have whatever car brand you are applying these wheels to. I removed the ANTERA caps.

I have matching 295 35 20s available if you want to go super wide but they look too much for the DB9. These are £100 each extra.

Thanks for looking

Steve 07931973644