1. This product adopts high-tech ceramic PTC thermistor as the heating element, and the heating speed is fast. The PTC thermistor is automatically constant temperature, and when the temperature rises to the design temperature of the glue gun, it will no longer rise, which can prevent the damage to the glue gun caused by the overheating of the heating element, save energy consumption, and achieve the purpose of prolonging the service life.
2. The electrical insulation strength of this product does not break down when energized at 3750V/min. It can be used normally in AC or DC power supplies between 110V-240V, and is not limited by voltage fluctuations. It has a built-in safety fuse, which is safer to use.
【Applications】
1. Toy model
2. Artificial flowers, Christmas tree
3, decorations, metal products
4, wood products, cardboard, etc.
5. Electronic circuit boards.
【Instructions】
1. This series of products can be used for rubber strips with a diameter of 7-7.5 mm.
2. Insert the glue strip from the end of the glue gun and send it to the barrel. After plugging in the power supply and preheating for 5-8 minutes, pull the trigger to extrude the melt glue and control the amount of glue.
3. During use, if one glue stick cannot be used up at a time, the glue stick does not need to be taken out. The next time you use it, you can plug in the power supply to preheat for 5-8 minutes and use it directly.
【Precautions】
1. Use voltage 100-240V, frequency 50-60HZ.
2. This product is a high-temperature glue gun. The glue strip of the corresponding specification should be selected according to the product series. If the user uses the glue strip of different size or type, it may cause the melted glue to flow back and damage the glue gun.
3. When working, the temperature of the nozzle of the glue gun and the melted glue is relatively high. It is forbidden to use it in flammable and explosive situations.
4. When the glue gun is working, do not lift the glue gun high, and the nozzle of the gun should not face upwards. If you do not apply glue for 15 minutes, please cut off the power supply, so as not to melt the glue strip and cause the glue gun to be poured and damage the glue gun.
5. Due to the durable material installed in the glue gun, there may be smoke when it is used for the first time. After 30 minutes of the glue gun, the smoke will be automatically eliminated.
6. Always keep the gun tail slider clean to ensure that the rubber strip can be smoothly fed into the gun barrel.
7. It is forbidden to pull out the glue strip in the glue gun from the end of the glue gun.
8. The glue gun should be placed in a ventilated and dry place when not in use. It is forbidden to place it in a damp or watery place, and it is forbidden to place it in a place where children or children can get it.
9. The tool must be placed on its stand when not in use.
- According to your choice.
- Good Good Good quality. Buy with confidence!
- We maintain high standards of excellence and strive for 100% customer satisfaction!
Shipping
- We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Contact us / Feedback：
- Please contact us via ebay messages only. A response will not be returned via email. All ebay messages will be answered as fast and efficient as possible.
- Please take a look at more great items offered in my store, and we do hope you enjoy your shopping experience.
