Notice: because of different batches, some components of DIY kit may be replaced by other equal-grade brands but the quality is absolutely the same, don't worry.
Warm tips:
1. Not including tubes and copper pillar. And this is DIY KIT which needs you to solder, if you want assembled board please contact us (adding 30USD).
2. If you only want PCB board please contact us.
3. If you want matched 300B power transformer ( Z11 EI 105*60mm ) and 300B inductors (Z11 EI 76*40mm), 300B/4300B, 6SN7/6N8P and 5U4Z/5Z3P tubes please contact us. And if you want complete kit including chassis + transformer + improved diy kit please click:
LINK
4. This is standard vesion, if you want improved version please click: LINK and the difference between them are below:
| Standard Version KIT |
Improved version KIT |
| ALPS 16 type potentiometer |
ALPS 27 type potentiometer |
| Common socket |
Gold-plated in-line socket |
| Philips 400v220uf |
Philips 400v220uf |
| Philips line electrolytic 100v 100uf |
RIFA new axial electrolytic 100v100uf
|
| Philips 16v8200uf disassemble |
The new Nikon 16v 8200uf |
| Philips 400v33uf disassemble |
The new Philips 400v33uf |
| Cathode resistor 1k |
Cathode resistor 1k 50w aluminum shell |
| 51R balance resistance |
3w 100ohm balanced locking potentiometer |
| Wima coupling |
German M-cap Mundorf |
| 2w mf Taiwan metal film resistors |
2w mf Taiwan metal film resistors |
| And many other elements |
And many other elements |
Features:
1. Reasonable layout circuit to reproduce classic style of 300B tube amplifier.
2. 2.0mm thick high quality immersion gold solder blue printed circuit board (185.4 * 286.2mm).
3. Ultra-low noise layout traces, almost no noise. High thermal design to ensure stable operation for a long time even if in a closed chassis.
4. Multi-component package designed to meet the requirements of the user change different size components.
5. Screw and hole location are beautiful reasonable, easy for diy chassis hole.We will sent the 1:1 hole size chart for free.
6. Each test point voltage has been marked, Easy to debug. (Good welding is ok, generally don't have to debug)
7. DC voltage accurate 5.0v filament supply, more tube rectifier ensures 300B life.
8. The tube amp design can take screen flow meter and VU meter.
Warm Tips:
1. The output transformer must firstly connect speakers and then to turn it on, otherwise it will be damaged because of no-load.
2. Electrolytic capacitors, diodes, rectifier bridge, voltage regulator chips soldered to note the direction (ref Pictures). Incorrect polarity will explode!
3. 300b tube seat the Coarse foot at the front when welding (1 4 feet coarse). Big Eight feet tube holder also pay attention to the direct.
4. Input voltage to the terminal connection must be strictly in accordance with the picture, can not be wrong.
5. Filament balancing use 51R resistor or 100R potentiometer adjustment, choose one way. Not two kinds are connected.
6. Power transformer 230v, 14v (vu meter use) three lines do not connect! The output transformer superlinear insulation tap G also don't pick up.
