Description:
This flash trigger with built-in wireless X system for versatile using methods, featuring multi-channel triggering and stable signal transmission, can as a wireless flash trigger for camera flash, outdoor flash, and studio flash, a wireless trigger for Canon speedlites, a wireless shutter release trigger, also can as a flash(without wireless X system) trigger with 2.5mm sync cord jack. With 5 group buttons and 4 function buttons for convenient operation. And it is compatible for multiple camera models and flash models. Nice choice for you!

Features:
It can not only control the flashes with built-in wireless X system, such as camera flashes, outdoor flashes and studio flashes, but also can control the original flashes for Cannon when using in combination with X1R-C receiver. Widely applied for Canon EOS series cameras with hot shoe mount.
Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one shoot & multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.
Lightweight feature for great portability. Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.
16 groups and 32 channels to wireless control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. Compatible for multiple flashes and camera models.
 
Specification:
Condition: 100% Brand New and High QualityCondition: 100% Brand New and High Quality
Material: Plastic
Compatible Cameras: For Canon EOS cameras (E-TTL ii autoflash) Support for the cameras that have PC sync socket.
Power Supply: 2 X AA Batteries(Not included)
TTL Autoflash: E-TTL II
Manual Flash: Yes
Stroboscopic Flash: Yes
High-Speed Sync: Yes
Second-Curtain Sync: Yes
Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments
Flash Exposure Lock: Yes
Focus Assist: Yes
Modeling Lamp: Controled by the flash trigger
Beeper: Controled by the flash trigger
Wireless Shutter: The receiver end can control the camera shooting via the 2.5mm sync cord jack
ZOOM Setting: Adjust the ZOOM value by the transmitter
TCM Function: Transform the TTL shooting value into the output value in the M mode
Firmware Upgrade: Upgrade through the Type-C USB port
Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart
Transmission Range (approx.): 0-100m
Built-in Wireless: 2.4G
Modulation Mode: MSK
Channel: 32
Wireless ID: 01-99
Group: 16
Display: Large LCD panel, backlighting ON or OFF
Size: Approx. 90 X 58 X 50mm / 3.54 X 2.28 X 1.97inch
Weight: Approx. 300 g
 
Compatible flash and camera models:
1. can be used to control following flash models:
2. Compatible for Canon EOS series camera models:
1Dx MarkII 1Dx FiveDs/FiveDsr FiveDIV FiveD MarkIII FiveD MarkII FiveD
7D MarkII 7D 6D 80D 70D 60D 50D
40D 30D 750D/760D 700D 650D 600D 550D
500D 450D 400D 400D Digital 350D Digital 100D 1200D 1000D
1100D M5 M3

Packing List:
1 x Wireless Flash Trigger
* Camera, flash and batteries are not included.
* We accept PAYPAL only for Safety and easy. Please message us if there any problem during payment.

* Ship to Woldwide

* We will ship the item within 2 business days after clearance of payment.

* Shipment is directly from Hongkong Via Hongkong Post. It usually takes about 18-35 days to Australia.

* We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

*You have 7 days to contact us and 30 days to return it from the date it was received. Shipping cost is bear by both seller and buyer in half.

*All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number and specific reason for the return.

*We will refund or resend you after we have received the returned item

*We will bear all the shipping cost if the product(s) is (are) not as advertised.

* 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

* Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.

* You agree to all of the above-listed policies upon ordering on ebay

* We maintain high standards of excellence and strive for 100% customer satisfaction!

* Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

PushAuction