Product Description

Package include

1× SDF08NK8X Servo Drive 1× 750W 80F-0230GDL-Z AC Servo Motor with brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug pdf. english user manual

Parameters of the motor

Model: 80F-0230GDL-Z Power: 750W Number of poles: 5 Rated power supply: 220V Rated speed: 3000r/min Peak speed:6000r/min Rated torque: 2.39Nm Instantaneous maximum torque:7.17Nm Rated current: 4.8A

Torque & Speed Diagram

With brake: Yes Back emf:34 V/1000rpm Torque constant: 0.54N.m/A Line resistance: 1.08Ohms D axis inductance: 2.1mH Q axis inductance: 2.5mH Electrical time constant: 3.89ms Rotor inertia: 1.78 10-4kg·m² Insulation class: F(155℃) Waterproof grade: IP65

Motor dimension drawing

Application

Application areas: Industrial manipulator,Semiconductor equipment,Engraving equipment,Measuring equipment,Medical equipment,robot and other automated equipment on the market.

Parameters of the driver

Model: SDF08NK8X Maximum current: 10.5A Input voltage: AC170-253V (50/60Hz) Cooling method: Heat dissipation air cooling Control mode: SVPWM control Encoder: 17 bit absolute photoelectric encoder Operating temperature: 0℃~+55℃ Storage temperature: -20℃-80℃ Protection level: IP54

Parameters of the driver

Control model: Position control/speed control/torque control/inching operation/RS485 communication Braking function: Built-in Display and operation: Six digit seven segment display LED,four function operation

Parameters of the driver

Protective function: Undervoltage, overvoltage, overload, overcurrent, encoder abnormality, braking, position out of tolerance, etc. Command control mode: external pulse External command pulse input form: pulse+square, double pulse, A/B quadrature Speed control range Speed regulation ratio: 1:5000

SDF Series Driver Position control mode wiring diagram (24V single-ended input signal)

Note:

The functions of input port 1-input port 6 can be defined; please refer to PN1110-PN116 parameters for details.

The function of output port 1-output port 3 can be defined;please refer to PN70-PN72 parameters for details.

Position control model

• Command control model: External pulse
• External command pulse input:
• Form: pulse+ direction cw/ccw A/B orthogonality
• Maximum frequency differential motion: 1MHZ open collector: 200KHZ
• Electronic gear ratio: 1～32767/1～32767
• Speed control range: speed ratio: 1:5000
• Speed rate of change: Speed fluctuation ratio: ＜±0.03(load 0 - 100%) .＜ ±0.05 (power -15% - +10%)
• Command smooth way: Linear time constant 1 ms-10000ms （0r/min←→1000r/min)
• frequency characteristic: 300HZ

SDF Series Driver Position control mode wiring diagram (5V different signal input)

Input/output signal:

• location signal output
• output type:ABZ phase line drive output/ Z open collector output
• frequency division ratio: 1/225～1Frequency division
• input signal---7 points photoelectrie isolation input:
• Input point can be defined as any 21kinds, see parameter setting

Output signal 4 collector open

• location/speed reach
• servo alarm output
• Z signal output
• brake output.

Advantage

1.Matching with 17-bit single-turn absolute value optical encoder, 5 pairs of poles,to ensure the positioning accuracy of one millionth.

2.Standard RS485 communication function, realize upload and download network control

3.All input/output ports can be freely defined and have strong applicability

4.Position control, speed control, torque control Modbus;communication can be converted to meet common applications

5.A variety of intelligent monitoring functions and operation panels are convenient for customers to debug and diagnose

6.The internal simple PLC function, in some simple control occasions, PLC can be completely omitted, and a lower cost solution can be realized.

Servo drive power supply and peripheral devices wiring

Power line terminals wiring

• L1,L2,L3,PE,U,V,W terminal, transversal area≥1.5mm2 (AWG14-16).
• L,N terminal,transversal area≥1.0 mm2 (AWG16-18).
• Grounding:the grounding wire should be as thick as possible,drive and servo motor grounding at PE terminal,grounding resistance＜100Ω

Payment:
> 1. Payment is needed to receive within 5 days after deal.


Feedback:
We maintain hightest buyer ratings
> Positive Feedback will be much appreciated from you.
> Any dissatisfaction,please contact us immediately!
> Please do not leave neutral or negative feedback before we help you out.

Returns:
> Defect: We will fully refund or send you a new replacement,please contact and return within 30 days.
> Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods.
> Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued.

Contact us:
> If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.