UBEC-4A Instruction: 5V/6V output switchable! Power polarity misconnected protection LED working status indicator! A ferrite ring is attached with the output wires to significantly reduce
electromagnetic interference! 4A UBEC is an external voltage stabilizer, it works at the
Switch Mode 。It can obtain the suitable DC voltage from 7-25.5V input voltage
for receivers and other devices, and steadily provide 6A current to supply power
for receiver, gyro, and multi servos. Therefore, the 6A UBEC is very suitable
for large electric fixed wing aircraft and helicopters which uses 4S or more
batteries. With this UBEC, you can obtain the power for receivers from dynamic
power without equipping independent battery pack for receivers. Specifications Output voltage:5V/4A or 6V/4A(changeable with a jumper, Maximum output
current:6A(≤15S); Input:7-25.5V (2 to 6 cells Lipo battery pack, 6 to 16 cells NIMH battery pack); Ripple:<45mVp-p(@2A/12V); Size:39mm*21mm*6mm (L*W*H); Weight:14g(incluing the cable and the ferrite ring Features Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of
the chip is up to 93% ; The small size and the light weight make it very convenient to use; The output current is very large, the continuous output current is up to 4A, and
the burst output current is 6A.; A shield covers almost all the electronic components on PCB, and a special made
filter(ferrite ring) is attached with the output wires to significantly reduce
the electromagnetic interference; With ultra-wide input voltage from 7V—25.5V; Safe power on with the polarity protection function. If the input polarity is
not correct ,the UBEC can’t work, but it will not be damaged. What you need to
do is just swapping the battery pack’s polarity ; Shows the working status with an indicator(LED), lights when the output is in
normal range; UBEC-6A Features Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of
the chip is up to 93%; The small size and the light weight make it very convenient to use; The output current is very large, the continuous output current is up to 6A, and
the burst output current is 8A; A shield covers almost all the electronic components on PCB, and a special made
filter(ferrite ring) is attached with the output wires to significantly reduce
the electromagnetic interference; With ultra-wide input voltage from 7V—25.5V(Low Voltage Version) or
14V---42.5V(High Voltage Version); Shows the working status with an indicator ( LED), lights when the output is in
normal range. Specifications Output:5V/6A or 6V/6A (Changeable with a jumper), Burst output current:8A
(≤15 Sec) Input :7-25.5V (2 to 6 cells Lipo battery pack, 6 to 16 cells NIMH battery pack) Ripple:<45mVp-p(@2A/12V) Size:39mm*21mm*6mm (L*W*H) Weight:14g(Including the cable and the ferrite ring) UBEC 8A This BEC is a good choice for high current applications.
It can support 8amps continuous and a 12amp burst current. It is compatible with
a 7V‐25.5V input voltage and offers a choice of step-down voltages: 5V/6V/7.4V.
There is also a jumper plug, which can be used to enable / disable the power
output.
Features Switchable 5V/6V/7.4V Output (selectable via jumper) Designed with an advanced switching power supply control chip with overcurrent
and overheat protection function Max efficiency of the chip is up to 93% Provides large output current, the continuous output current is 8A, and the
burst output current is 12A Designed with a high quality switching power supply conversion chip,
significantly reduce the electromagnetic interference Ultra‐wide input voltage range, works properly from 7V‐25.5V Shows the working status with an indicator (LED), lights when the output is in
normal range
Specification Output: 5V/8A, 6V/8A or 7.4V/8A (Changeable by jumper) Input:7‐25.5V (2 to 6 cells Lipo, 6 to 16 cells NIMH) Continuous output current:8A Burst output current:12A (≤15 Sec) Ripple:<35mVp‐p(@8A/12V) Size: 45x22x7.5mm Weight: 16g
Package Included 1x UBEC Module
|