Furutech ADL Category 8 compatible LAN Cable 1.2M LAN8NCF1.2
Description
Manual : Japanese
-Ultra high speed up to 40 Gbps compatible 2000MHz 24AWG S / FTP triple shield / thick gold plated RJ45 connector + NCF shell Category 8 compatible Ethernet LAN cable.・ Outer diameter: 7.0 ± 0.1 mm approx.・ Conductor: 19 / 0.12 24AWG Sterling silver plated α (Alpha) OCC-Insulation: Special high-density polyethylene 4-pair twisted pair cable■ NCF shell (multi-material hybrid structure) Special material "NCF" is blended as a countermeasure against static electricity. In addition to the powerful damping effect, the electrostatic effect has increased. This suppresses the generation of noise, enhances the sense of silence, and eliminates the muddyness of the sound, bringing out the original charm of the buried sound source. The original sound source and equipment are brought out without coloring the sound. ■ Transmission capacity "40GBASE-T" Fulltech's LAN-8 Ethernet cable is a twisted pair cable for Ethernet and other high-speed signal transfer, and is an S / FTP category 8 standard. It is a cable compatible with "40GBASE-T" of next-generation 40 Gigabit Ethernet, which is ideal for high-speed communication. ■ Static electricity and electromagnetic wave prevention Double aluminum foil shield Category 8 is upward compatible with existing Cat 6, Cat 7, etc., but stricter specifications for crosstalk and noise are specified compared to Category 7. .. Therefore, each twisted pair wire is covered with an aluminum foil shield to prevent static electricity and electromagnetic waves. ■ Interference protection Copper conductor braided shield 16/10 / 0.10 TC α (Alpha) Copper conductor braided mesh 8 mesh / inch High-density porosity shield. It has a better shielding effect than conventional cables, and is composed of a triple shield with a double aluminum foil shield added to the entire cable. ■ Transmission frequency bandwidth Supports high-frequency bands up to 2000MHz, which is 3.3 times that of category 7, and is resistant to noise interference, realizing a high-speed and stable network environment. ■ Adoption of sterling silver-plated α-OCC The ultimate material 24AWG sterling silver-plated α-OCC is adopted for the main conductor, and the sound resolution is improved by effectively isolating noise with special high-density polyethylene insulation and a detailed triple shield structure. It will improve dramatically. ■ Thick-walled gold-plated RJ45 connector The gold-plated 50μ contact pin adopts a three-pronged design, ensuring stable data transfer with a larger contact area. The RJ45 shield uses a 24k gold-plated non-magnetic copper alloy to prevent signal deterioration. ■ Vibration damping sheath The sheath has passed the UL / CL3 flame resistance test, and the special flexibility PVC and nylon sleeve that reduce the influence of vibration conforming to the RoHS directive prevent internal resonance and provide high-performance damping. Demonstrates a vibration effect.
-Ultra high speed up to 40 Gbps compatible 2000MHz 24AWG S / FTP triple shield / thick gold plated RJ45 connector + NCF shell Category 8 compatible Ethernet LAN cable.・ Outer diameter: 7.0 ± 0.1 mm approx.・ Conductor: 19 / 0.12 24AWG Sterling silver plated α (Alpha) OCC-Insulation: Special high-density polyethylene 4-pair twisted pair cable■ NCF shell (multi-material hybrid structure) Special material "NCF" is blended as a countermeasure against static electricity. In addition to the powerful damping effect, the electrostatic effect has increased. This suppresses the generation of noise, enhances the sense of silence, and eliminates the muddyness of the sound, bringing out the original charm of the buried sound source. The original sound source and equipment are brought out without coloring the sound. ■ Transmission capacity "40GBASE-T" Fulltech's LAN-8 Ethernet cable is a twisted pair cable for Ethernet and other high-speed signal transfer, and is an S / FTP category 8 standard. It is a cable compatible with "40GBASE-T" of next-generation 40 Gigabit Ethernet, which is ideal for high-speed communication. ■ Static electricity and electromagnetic wave prevention Double aluminum foil shield Category 8 is upward compatible with existing Cat 6, Cat 7, etc., but stricter specifications for crosstalk and noise are specified compared to Category 7. .. Therefore, each twisted pair wire is covered with an aluminum foil shield to prevent static electricity and electromagnetic waves. ■ Interference protection Copper conductor braided shield 16/10 / 0.10 TC α (Alpha) Copper conductor braided mesh 8 mesh / inch High-density porosity shield. It has a better shielding effect than conventional cables, and is composed of a triple shield with a double aluminum foil shield added to the entire cable. ■ Transmission frequency bandwidth Supports high-frequency bands up to 2000MHz, which is 3.3 times that of category 7, and is resistant to noise interference, realizing a high-speed and stable network environment. ■ Adoption of sterling silver-plated α-OCC The ultimate material 24AWG sterling silver-plated α-OCC is adopted for the main conductor, and the sound resolution is improved by effectively isolating noise with special high-density polyethylene insulation and a detailed triple shield structure. It will improve dramatically. ■ Thick-walled gold-plated RJ45 connector The gold-plated 50μ contact pin adopts a three-pronged design, ensuring stable data transfer with a larger contact area. The RJ45 shield uses a 24k gold-plated non-magnetic copper alloy to prevent signal deterioration. ■ Vibration damping sheath The sheath has passed the UL / CL3 flame resistance test, and the special flexibility PVC and nylon sleeve that reduce the influence of vibration conforming to the RoHS directive prevent internal resonance and provide high-performance damping. Demonstrates a vibration effect.