Our Business hours: We are closed on Saturdays and Sundays.  






Completely Silent Fanless Mini ITX PC Case

+ Modular Cable 12V-to-ATX Power Supply - Installed

+ Internal CMOS buzzer to connect to motherboard's speaker port (as pictured)

Bonus: 2pcs new factory sealed SATA III 6Gb/s data cables



You get what's exactly pictured only.  NOT INCLUDED: 


       Install these parts to complete your system: Motherboard/CPU, SSD or hard drive, AC Adapter and Memory





Case dimensions: 246mm x 61mm x 189 mm

Mini ITX is a small standard physical form factor that is one size smaller than Micro ATX.  There are many mini ITX motherboards available in distribution and yet they are being built using micro ATX cases which does not effectively utilize its small footprint.  

HIGH POWER® mITX-0DB is virtually the smallest chassis you can buy that will work with any standard mini ITX motherboard.  Best of all, the high efficiency power supply solution provided does not require any cooling fan, making it a complete silent solution.  When installed with a fanless CPU/motherboard combo, your system will be truly 0db.   That is why there is a highly visible blue LED ring around the power switch to provide visual clue that the system is on.    
    
One of the Smallest Cases You Can Buy ... if you want to use standard components 



º Black mini ITX case with 2x front USB 2.0 port and blue LED back-lighted power switch
º Pre-installed: 90W 12V DC-to-DC fanless ATX power board with modular cable assembly



Application: Smart mini PC, Industrial Embedded System, POS/POI, KIOSK, DVR, CCTV, Car, Boat, PC , Thin Client, Set Top Box, Firewall, Banking Terminal, Transaction Station , ATM, NAS, Web Payphone and Terminal Platform ,etc. 
  • Long life and low maintenance - With no fan blowing to bring dust inside
  • Silent and light weight
  • Drive bracket holds one 2.5" drive
  • Case dimensions: 246 x 61 x 189 mm

System Installation Tip:

1. Remove the drive bracket 
2. Install your mini ITX motherboard
3. Install your hard drive (or SSD drive) onto the drive bracket
4. Install the drive bracket back to the case

Internal DC-to-DC fanless ATX Power Supply Specifications

• DC Input: 11.4~13.0V, Max 10A/12V
• Maximal Inrush current: 45A @12V at 25℃ cold start
• Output up to 90W (120W Peak)
• Ripple and Noise: <120 mV
• Load Regulation: +/- 5%
• Efficiency: 80% minimum at full load
• Multi protection: OLP, OCP & SCP
• Operation Temperature: -10 to 50℃

Power Connector Summary:
1 x 20/ 24 pin Dual-Use Main Power Connector
1 x P4 12V Power Connector
1 x Molex Peripheral Power Connector
1 x SATA Power Connector



Output Voltage
 +5V
 +3.3V
 +12V
 -12V
 +5VSB
Rated Load
 5.0A
 6.0A
 3.2A
 0.1A
 1.0A
Peak Load
 10A
 10A
 5.0A
 0.5A
 1.5A




If you are going to use a motherboard with integrated CPU & heatsink, you are fine.

If your CPU requires a cooling fan, check out these Low Profile Intel CPU Cooling fans



Question & Answer


Q: What kind of hard drive does it support and does it support SSD ?

A: 2.5-inch form factor hard drive or SSD drive are supported. 




Q: How do I mount this mini case to the back of my LCD monitor ?

A: Install the 4 optional VESA screws on the back of your VESA compatible monitor. Then simply align the center of each integrated VESA mount/stand to each screw like how you would mount a picture frame.   VESA monitor mounting screws - available











Actual Ebay buyer feedback for this product:


great deal, product and shipping........... Buyer:  helpful55




https://i.ebayimg.com/00/s/NTIyWDY3Mg==/z/30YAAOSwm3pZ95y7/$_57.JPG

https://i.ebayimg.com/00/s/Mjc0WDkwMA==/z/M2EAAOSw851cFAsF/$_45.JPG





Store Policy & About us
(More on Shipping/ Return Policy / None-USA International Customers)